Operation Manual

4.1.3. Battery chargers and accessories

Plug-type charger

for 230 V~ # 14 5535 (50 mA) or # 14 5536 (100 mA)

for 110 V~ # 14 5538

These units charge the transmitter and receiver batteries simultaneously at around

50 mA (# 14 5535) or 100 mA (#14 5538). Charge leads to suit MULTIPLEX transmit-

ter and receiver batteries (MPX connector system) are fitted to the chargers as stan-

dard.

Combilader 5/700 for 230 V~ # 14 5541

This unit charges the transmitter and receiver batteries simultaneously at a maxi-

mum total rate of around 700 mA.

Charge leads are available as follows for:

• MULTIPLEX transmitter ⇒ # 8 6020

• Receiver battery (MPX connector system) ⇒ # 8 5106

• Receiver battery (UNI connector system) ⇒ # 8 5094

• Receiver battery (Micro connector system) ⇒ # 8 5112

PiCO line AUTO-Lader # 9 2526 for use with a 12 V car battery or a stabilised power

supply

This battery charger features automatic charge termination, and is designed for

rapid-charging of flight batteries with up to seven cells fitted with the HC (green)

connector system. It can also charge your transmitter and receiver batteries pro-

vided that they are of the rapid-charge type (read the battery manufacturer’s notes

if you are not sure).

Charge leads are available as follows for:

• MULTIPLEX transmitter ⇒ # 8 5163

• Receiver battery (MPX connector system) ⇒ # 8 5099

• Receiver battery (UNI connector system) ⇒ # 8 5096

• Receiver battery (Micro connector system) ⇒ # 8 5097

Drive batteries (flight packs) with the MULTIPLEX HC (green) connector system can

be connected to the charger directly.

Other battery chargers with banana plug sockets (4 mm Ø)

Charge leads are available as follows for:

• MULTIPLEX transmitter ⇒ # 8 6020

• Receiver battery (MPX connector system) ⇒ # 8 5106

• Receiver battery (UNI connector system) ⇒ # 8 5094

• Receiver battery (Micro connector system) ⇒ # 8 5112