Operation Manual

41
!!
The timer is visible only in the operating screens INO 1 and INFO 2 !
This is how you set the alarm time:
Procedure Display
1.
Select the ALARM1 setting in the TIMER menu and
switch to the second line
2.
Set the alarm time, e.g. 2 min 30 sec
3.
Return to the first line
Continue as shown in the flow chart
9.2. Teacher/pupil mode
The COCKPIT
MM
can be used as the pupil transmitter for „trainer“ operations by con-
necting it to a transmitter, which can be expanded with a teacher/pupil switch. The
teacher/pupil lead must be # 8 5121. :
PROFI mc 4000, PROFI mc 3010 and 3030,
Commander mc 2010 plus, 2015, 2020,
Combi 90 (Cockpit, Commander),
Royal mc
Teacher/pupil operation is not possible with other MULTIPLEX transmitters and/or
the old twin-core teacher/pupil lead # 8 5045
Preparation:
1. Set the pulse format for all servos to MN (MULTIPLEX, Normal). It’s a good idea
to a specific model memory for teacher/pupil operation.
2. Connect the transmitters with the teacher/pupil lead.
Do not disconnect the lead while using the teacher/pupil system.
Note the inscription on the teacher/pupil lead.
Connect the teacher plug to the teacher tx, the pupil plug to the COCKPIT
MM
.
3. Switch on the teacher transmitter only. The Cockpit remains OFF!
Power is fed to the COCKPIT
MM
from the teacher transmitter via the teacher/pupil
lead.
4. Activate the COCKPIT
MM
pupil mode
Pupil mode can be activated from any model memory.
This is how you set pupil mode:
Procedure
Display
GB: D:
1.
Select the PUPIL setting in the SETUP menu and
switch to the second line
PUPIL SCHUL
OF AUS
2.
Select pupil mode
PUPIL SCHUL
ON AN