Operation Manual

23
This is how you select the stick mode:
Procedure Display
1.
Select the MODE setting in the SETUP menu and
switch to the second line
2.
Select the stick mode e.g. MODE 3
3.
Return to the first line.
Continue as shown in the flow chart.
8.2.3. The Throttle/Collective Pitch trim of the COCKPIT
MM
All settings are to be done in the menu item LEERL/IDLE (menu SETUP) gemacht.
For the model type UNI the following selections exist:
IT_ Idle position of the throttle stick and throttle trim: back
IT` Idle position of the throttle stick and throttle trim: forward
CT- Center trim (e.g. if the stick is not used for throttle)
For the model type HELI only two selections exist:
IT_ Collective pitch minimum back, collective pitch trim active
LT` Collective pitch minimum forward, collective pitch trim active
The collective pitch trim affects collective pitch, throttle and the tail rotor!
Exception: mode 5 to 8 in models of the UNI type:
The controls for SPOILER and THROTTLE are exchanged. The trim next to the
SPOILER stick is now used for THROTTLE trim. The spoiler itself can not be trimmed.
Idle trim in practice:
Supposed the throttle stick can make the carburettor opening “fully open” and
“closed”, the motor will stop, whenever the stick is in idle position. Idle trim enables
you to set a trim value, which keeps the motor running “smoothly”.
This is how you select the type of throttle trim:
Procedure
Display
GB: D:
1.
Select the IDLE (or LEERL) setting in the SETUP
menu and switch to the second line
IDLE LEERL
IT_ LT_
2.
You can now select the type of throttle trim e.g.
idle forward
IDLE LEERL
IT` LT`
3.
Return to the first line
Continue as shown in the flow chart