Operation Manual

This is how you select the model type:

Procedure Display

Select the MODEL TYP setting in the SETUP menu

and switch to the second line.

You can now select the model type

e.g. H (for HELI)

Return to the first line.

Continue as shown in the flow chart.

Note: Erase model memory (RESET)

If you change the model type in a model memory which contains the data for an

existing model, the result is a RESET of that memory, i.e. all the settings are reset to

the factory default values (servo travel 100%, centre 0%, format UNI normal, all

mixers OFF or 0%, Dual Rate 60/100%, EXPO 0%). You should always do this delib-

erately before you start entering the settings for a new model. If you accidentally

reach the second line of the Model Type menu point, but don’t wish to change the

current model type and its settings, you must select „--“ before you return to the

first line.

8.2.2. Selecting the transmitter configuration (stick mode)

The term „stick mode“ is used by model flyers to indicate the correlation between

the transmitter controls and the corresponding functions in the model. The trans-

mitter requires this information internally in order to process the signals correctly. If

you do not yet know which stick mode is ideal for your purposes, the best solution

is to ask amongst those local modellers who might be able to help you, or request

advice from your fellow flying club members.

The various stick modes are summarised in the table below:

L.H. stick controls: R.H. stick controls: Control F controls:

⇒⇒ Mode

Elevator Rudder Throttle Aileron Spoiler 1

Throttle Rudder Elevator Aileron Spoiler 2

Elevator Aileron Throttle Rudder Spoiler 3

Throttle Aileron Elevator Rudder Spoiler 4

Elevator Rudder Spoiler Aileron Throttle 5

Spoiler Rudder Elevator Aileron Throttle 6

Elevator Aileron Spoiler Rudder Throttle 7

Spoler Aileron Elevator Rudder Throttle 8

TIP:

It is possible to change the stick mode within a model memory without erasing or

changing the other settings. This makes it possible for a friend to control one of

your models even if he or she is used to a different stick mode.