Operation Manual

15
5.
Press the 3D digi-
adjustor once
1 x
You reach the settings of the
SETUP menu.
6.
Rotate the 3D digi-
adjustor 5 times
clockwise
5 x
You reach the language select
setting „TEXT“.
At this point we ought to mention how the cursor 44 works:
As soon as you have selected a setting at the parameter level, you can switch from
the first line (orientation line) to the second line (setting line) by pressing the 3D
digi-adjustor once. Once the cursor is in the second line you can adjust the setting
by rotating the digi-adjustor. The cursor moves from the first to the second line to
confirm that you have moved to that part of the program.
7.
Press the 3D digi-
adjustor once
1 x
The cursor jumps to the second
line. „DEU“ means that the active
language is German (deutsch)
8.
Rotate the 3D digi-
adjustor1 step
clockwise
1 x
„EN“ appears. The language is
now switched to English
9.
Press the 3D digi-
adjustor once
1 x
The cursor moves back to the
first line.
10.
Rotate the 3D digi-
adjustor 6 steps
anti-clockwise
6 x „EXIT“ appears
11.
Press the 3D digi-
adjustor once
1 x
„SETUP“ appears. You are re-
turned to the Menu level.
12.
Rotate the 3D digi-
adjustor 6 steps
anti-clockwise
6 x „INFO“ appears.
13.
Press the 3D digi-
adjustor once
1 x
You are returned to the starting
point: operating screen 1.
This completes the example, and you have now selected your chosen language. All
other settings are selected and changed using the same general principle. If you
already have experience in modelling and are familiar with the type of program-
ming we are dealing with here, you will now be able to set up your first model with
the help of the flow chart.