Operation Manual

14
5.2. Screen and 3D digi-adjustor
The LCD screen consists of two lines, each capable of displaying 6 letters, numbers
or symbols, and it forms the basic means of showing the menus and settings cur-
rently in use.
When you first switch on the transmitter you will see operating screen 1:
The first line always helps to orientate you, i.e. it tells you where you are currently
located within the menu structure of the program. Assuming that you are at the
parameter level (see flow chart), the bottom line is where the actual programming
is carried out: changing settings, activating mixers etc.
5.3. Example: selecting your language
Here is a brief example intended to illustrate how the 3D digi-adjustor is used, and
what can be seen on the screen:
The Cockpit MM features a language select function, i.e. you can switch those texts
which are not internationally comprehensible from the default German to English.
In this example we will use this facility. Keep the flow chart to hand for this. As you
will see from the chart, you select your chosen language as follows:
Procedure Effect Display
1.
Switch
transmitter on
The operating screen appears.
You are at the Info level.
2.
Rotate the 3D digi-
adjustor 1 step anti-
clockwise
1 x „„MENU“ appears on the screen
3.
Press the 3D digi-
adjustor once
1 x
„INFO“ appears. You are now at
the menu level.
4.
Rotate 3D digi-
adjustor 6 steps
clockwise
6 x
x You leaf through the
menu level until the „SETUP“
menu appears.
INFO screen 1
line 1
line 2
model type (e.g. UNI)
Operating voltage (e.g. 7.8 V)
model memory No. (e.g No. 1)
Cursor
Trim display (4x)
(all 4 neutral)