Operation Manual Lipo Saver

Type LiPo - SAVER 2...6S LiPo SAVER 2...6S - 60A

Order No. #85421 #85419

Cell count 2...6S 2...6S

Suitable battery types LiFe, LiPo, LiIo LiFe, LiPo, LiIo

Balancer socket type XH, EH, TP/FP XH, EH, TP/FP

Cell voltage measurement range 1,0V ... 4,45 V 1,0V ... 4,45 V

Overall voltage measurement range 26,6 V 26,6 V

Voltage measurement resolution 0,1 V 0,1 V

Maximum permissible current - 60 A

Current measurement range - 0,1A ... 100 A*

Current resolution - 0,1A

Operating voltage 3,5 ...... 9,0 V 3,5 ...... 9,0 V

Current drain 6 mA 6 mA

Set contents Sensor, heat-shrink sleeve, balancer adapter leads for

batteries with TP / FP connectors

Sensor weight 4 g 5 g

Weight incl. accessories 6 g 7 g

Sensor dimensions [L x W x H] 21 mm x 31mm x 6,5

36 mm x 31mm x 6,5

* Measurement range only! Currents above 60 A may damage the sensor.

1.1 Special features

The LiPo SAVER 2...6S includes a series of

outstanding and innovative features:

· Measurement of individual battery cell voltages.

· Measurement of overall battery voltage.

· Display of battery charge after start-up as a

percentage.

· Low-voltage warning via telemetry: two user-variable

alarm thresholds.

· Optional automatic warning if a part-charged battery

is connected to the system.

· Simple to operate and update using MULTIPLEX

Launcher.

The LiPo SAVER 2...6S - 60 A includes the following

additional features:

· Measurement of the current actually owing.

· Residual capacity display (fuel gauge) in mAh or %.

· Automatic calculation and reset of the residual

capacity display based on the lowest individual cell

voltage.

· User-variable alarm threshold for residual battery

capacity.

· User-variable warning threshold for maximum

current.

· Optional address for the display of maximum current

measured.

1.2 Specication