User Manual

12
even the best RC system in the world is subject to outside
interference. No matter how many years of accident-free
flying you have under your belt, you have no idea what will
happen in the next minute.
We - the MULTIPLEX team - hope you have many hours of
pleasure building and flying your new model.
Klaus Michler
Parts list - Twin-Jet
Part No. Description Material Dimensions
No. off
01 1 Wing Particle foam Ready made
02 1 Fuselage nose Particle foam Ready made
03 1 Left fin Particle foam Ready made
04 1 Right fin Particle foam Ready made
05 1 Canopy Particle foam Ready made
06 1 Fuselage top decking Particle foam Ready made
10 1 Fuselage liner shell Vac. moulded plastic Ready made
15 1 Building instructions A4 format
16 1 Name placard decal set Printed film Ready made
20 1 Landing skid Balsa 10 x 10 x 800 mm
21 1 Cut from part 20
Canopy hook block Balsa 10 x 10 x 35 mm
22 2 Cut from part 20
lateral location Balsa 10 x 10 x 20 mm
Accessories
22 1 Screw-hook dowel Wood 10 Ø x 10 mm
23 3 Velcro tape, hook side Plastic 25 x 60 mm
24 3 Velcro tape, loop side Plastic 25 x 60 mm
25 2 Washer Metal M2
26 1 Allen key Metal 1.5 mm A/F
27 2 Pushrod connector grubscrew Metal M3
28 1 Rubber band Rubber 1 x 8 x 30
29 1 Rubber band Rubber 1 x 1 x 25
30 2 Pre-formed pushrod Metal Ready made, 1 mm Ø
31 3 Screw-hook Metal Ready made
32 2 Glue-fitting horn Plastic Ready made
33 2 Pushrod connector Metal Ready made
34 2 Nut Metal M2
Power system and small parts
35 2 Propeller Plastic 125 x 110 mm
36 2 Motor Permax 400 6V Ready made
37 1 Power cables, with connectors Ready made
38 2 Capacitor Ceramic / metal 47 nF
39 4 Insulating sleeve Plastic Ready made, 10 long