User manual
12
RTF Panda # 1 3268 / # 1 3269
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope
that you are completely satised with the contents of your kit. However, we would ask you to check all the parts (referring
to the Parts List) before you start construction, as we cannot exchange components which you have already modied. If
you nd a part is not acceptable for any reason, we will gladly correct the defect or replace the item in question once we
have inspected it. Please send the component to our Service Department, with adequate postage pre-paid, being sure to
include the completed complaints form. We are constantly working on improvements to our models, and for this reason
we must reserve the right to change the kit contents in terms of shape or dimensions of parts, technology, materials and
ttings, without prior notication. Please understand that we cannot entertain claims against us if the kit contents do not
agree in every respect with the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings in the usual sense of the
term. Building and operating them safely requires a certain level of technical competence and manual skill,
together with discipline and a responsible attitude at the ying eld.
Errors and carelessness in building and ying the model can result in serious personal injury and damage to property.
Since we, as manufacturers, have no control over the construction, maintenance and operation of our products, we are
obliged to take this opportunity to point out these hazards and to emphasise your personal responsibility.
Please take the time to read through the Instructions before completing and ying the model, paying particular attention
to the Safety Notes and Tips.
Warning:
Like every aeroplane, this model has static limits. Steep dives and senseless manoeuvres inappropriate to the type
may result in the loss of the aircraft. Please note: we will not replace the model in such cases. It is your responsibility to
approach the airframe’s limits gradually. It is designed for the power system recommended in these instructions, but is
only capable of withstanding the ight loads if built exactly as described and if it is in an undamaged state.
Set contents:
ELAPOR® model, 100% completely assembled,PERMAX 400/6V, RX-3 cont M-Link ID speed controller / receiver unit,
assembled 6 x 3” folding propeller, two Nano-S servos, Li-BATT FX 2/1-950 ight battery, SMART SX M-LINK transmitter,
dry cells for transmitter, 110-240 V MULTIcharger L-703 EQU battery charger, painted canopy, decals (orange) applied,
comprehensive instructions.
Optional accessories:
Recommended battery:
Li-BATT FX 2/1-950 (M6) ight battery => Panda! Order No. 15 7320
Adhesives:
Zacki ELAPOR ® 20 g Order No. 59 2727
Zacki ELAPOR ® Super liquid 10 g Order No. 59 2728
Battery charger:
MULTIcharger LN-3008 EQU and AC / DC 230V / 12V 5.0A PSU combo Order No. 9 2545
Model Service Box Order No. 8 5500
Specication: Panda Panda Sport
Wingspan 1160 mm 1160 mm
Overall length 800 mm 800 mm
All-up weight min. 470 g min. 520 g
Wing area approx.19 dm² (FAI) approx.19 dm² (FAI)
Wing loading min. 24.7 g/dm² min. 27 g/dm²
RC functions:
Elevator, rudder, throttle
Note: please separate the illustration pages from the centre of the building instructions.
GB