User Manual

Seite 19
52 1 Clear canopy Plastic Ready made
53 2 Main wheel Plastic 60 mm Ø
54 1 Tailwheel Plastic 26 mm Ø
56 1 Rudder pushrod sleeve Plastic 3 Ø x 400 mm
57 1 Elevator pushrod sleeve Plastic 3 Ø x 315 mm
58 1 Main undercarriage unit Carbon bre Ready made
59 1 Wing joiner tube Carbon bre 13 Ø x 250 mm
60 2 Tubular wing spar Carbon bre 14 Ø x 500 mm
61 1 Tailplane joiner tube Carbon bre 5 Ø x 335 mm
62 1 Tailwheel unit Spring steel wire Ready made
63 1 Rudder pushrod Spring steel wire 1.5 Ø x 560 mm
64 1 Elevator pushrod Spring steel wire 1.5 Ø x 520 mm
65 2 Aileron pushrod Spring steel wire 1.5 Ø x 76 mm
66 1 Rudder spar Balsa 5 mm thick
67 1 Elevator spar Balsa 5 mm thick
68 2 Tailplane spar Balsa 5 mm thick
69 1 M-frame Lime plywood 2.5 mm thick
70 1 Battery plate Lime plywood 2.5 mm thick
71 1 Wing retainer Lime plywood 2.5 mm thick
72 1 Cross-brace Plywood 2.5 mm thick
73 1 Plastic screw Plastic M5 x 60 mm
74 4 Socket-head screw Steel M3 x 8 mm
75 4 Flanged screw Self-tapping screw 2.6 x 8 mm
76 2 Self-tapping screw Self-tapping screw 3 x 14 mm
77 4 Countersunk self-tapping screw Self-tapping screw 2.6 x 8 mm
78 2 Axle screw Steel M3 x 38 mm
79 2 Washer Steel 3.2 mm I.D.
80 4 Self-locking nut Steel M3
81 4 Self-tapping screw Steel 2 x 12 mm
82 2 Socket-head retaining screw Steel M4 x 18
83 4 Swivel pushrod connector Aluminium 6 Ø x 8 mm
84 6 Socket-head grubscrew Steel M3 x 3
85 2 Collet Steel 2 mm I.D.
86 4 Magnet Steel 18 x 6 x 1 mm
87 2 Hook-and-loop tape, hook Plastic 25 x 60 mm
88 2 Hook-and-loop tape, loop Plastic 25 x 60 mm
89 1 Y-lead Various Ready made
90 1 Instrument sticker Self-adhesive lm Ready made
91 3 Servo output arm HD-LS Plastic Ready made
92 1 Servo output arm HD-IS Plastic Ready made
In addition, at RR # 264274:
93 1 Propeller Plastic Ready made
94 1 BL-O 3520-0920 motor Various Ready made
95 4 HS-82 MG servo Various Ready made
96 1 Propeller driver Aluminium Ready made
97 1 MULTIcont BL-55 S-BEC speed controller Aluminium Ready made