Instructions

15
List of parts
Small parts set
Propeller, driver, spinner set, EasyStar 3
Wire / rod set, wing joiner
Plastic parts set
Serial no. Qty. Name Material Dimensions
20 3 Velcro tape, hook Plastic 25 x 60 mm
21 3 Velcro tape, loop Plastic 25 x 60 mm
22 1 Rudder horn kit EasyStar 3 Plastic / Metal Ready-made
23 4 Swivel barrel Metal Ready-made, 6 mm Ø
24 4 Allen-head grubscrew Metal M3 x 3 mm
25 1 Allen key Metal 1.5 mm A/F
26 2 Pre-formed aileron pushrod Metal 1 Ø x 80 mm
27 2 Latch catch Inj.-moulded plastic Ready-made
28 2 Latch tongue Inj.-moulded plastic Ready-made
29 2 Cable holder Inj.-moulded plastic Ready-made
30 3 Screw (motor cowl) Metal 2,2 x 6,5 mm Ø1 x 80 mm
Serial no. Qty. Name Material Dimensions
55 1 Propeller boss Plastic Ready-made
56 1 Spinner Plastic 35 mm Ø
57 2 Folding propeller blade Plastic 7" x 6"
58 1 Propeller driver, taper collet Metal 3.2 Ø / M6 / hex-head, 13 A/F
59 1 Washer Metal 6.4 I.D.
60 2 Pan-head self-tapping screw Metal 2.2 Ø x 6.5 mm
61 1 O-ring Plastic 30 Ø x 1.5 mm Ø30 x 1,5 mm
62 2 Dowel pin Metal 3 Ø x 14 mm
63 1 Nut Metal M6
64 1 Shakeproof washer Spring steel 6.4 I.D.
66 1 Taper collet Metal 3.0 Ø / M6 / hex-head, 13 A/F
Serial no. Qty. Name Material Dimensions
50 1 Wing joiner GRP tube 8.0 Ø x 5.4 x 579 mm
51 2 Pre-formed pushrod, ele. / rud. Metal 0.8 Ø x 620 mm
52 2 Snake inner tube, ele. / rud. Plastic 2/1 Ø x 550 mm
53 3 Snake outer sleeve, elevator Plastic 3/2 Ø x 950 mm
Serial no. Qty. Name Material Dimensions
40 1 Firewall Inj.-moulded plastic Ready-made
41 1 Motor cowl Inj.-moulded plastic Ready-made
42 1 Cowl screw support Inj.-moulded plastic Ready-made
44 1 Tailplane clip Inj.-moulded plastic Ready-made
45 1 Upper tailplane sleeve Inj.-moulded plastic Ready-made
46 1 Lower tailplane sleeve Inj.-moulded plastic Ready-made
47 1 Tailplane frame Inj.-moulded plastic Ready-made
48 1 Tailplane slider Inj.-moulded plastic Ready-made
EN