Instructions

14
Accessories and tools
Contents
Specications
Required accessories
Optional accessories
Required tool
Wingspan 1366 mm
Overall length 977 mm
Flight weight standard 780 g
Wing area approx. 28 dm²
(wing + tailplane, excl. fuselage)
Wing loading from 28 g/dm²
RC functions Rudder, elevator and throttle, ailerons
• 1 x Zacki2 Elapor
®
20g # 1-01291
• 1x power kit EasyStar 3
with motor ROXXY BL Outrunner C28-30-1100kV
and controller, ROXXY BL-Control 720 S-BEC
# 1-01657
• 4x servo MS-12020 MG # 1-01654
• 1x receiver RX-5 light M-LINK 2,4 GHz # 55808
• 1x battery ROXXY EVO LiPo 3 - 2200M 20C # 316655
• MULTIcharger L-703 EQU 110-240V # 82523
• Scissors
• Balsa knife
• Combination pliers
• 4 - 5 mm Ø bradawl or small round le
• Hot glue
• Receiver RX-5 M-LINK telemetry-capable # 55817
• Transmitter COCKPIT SX 9 # 45161
• Zacki Elapor
®
super liquid 10g # 1-01292
• 1x Zackivator
®
– activator for Zacki and CA adhesive # 1-01032
Serial no. Qty. Name Material Dimensions
1 1 Building instructions, KIT
1.1 1 Complaints form, models
2A 1 Decal sheet „A“ Printed self-adhesive lm
2B 1 Decal sheet „B“ Printed self-adhesive lm
3 1 L.H. fuselage shell Moulded Elapor foam Ready-made
4 1 R.H. fuselage shell, with n Moulded Elapor foam Ready-made
5 1 Canopy Moulded Elapor foam Ready-made
6 1 Tailplane Moulded Elapor foam Ready-made
7 1 L.H. wing panel Moulded Elapor foam Ready-made
8 1 R.H. wing panel Moulded Elapor foam Ready-made
9 1 L.H. joiner channel cover Moulded Elapor foam Ready-made
10 1 R.H. joiner channel cover Moulded Elapor foam Ready-made
11 1 L.H. servo well cover Moulded Elapor foam Ready-made
12 1 R.H. servo well cover Moulded Elapor foam Ready-made
EN