User Manual

17
ying low over other people’s heads is proof of your piloting
skill; others know better. The real expert does not need to
prove himself in such childish ways. Let other pilots know
that this is what you think too, as it is in all our interests.
Always y in such a way that you do not endanger yourself
or others. Bear in mind that even the best RC system in
the world is subject to outside interference. No matter how
many years of accident-free ying you have under your
belt, you have no idea what will happen in the next minute.
Before every ight, check that the battery, the wings
and the tailplane are attached and rmly seated. Check
in turn that each control surface is operating correctly!
We - the MULTIPLEX team - hope you have many hours of
pleasure building and ying your new model.
MULTIPLEX Modellsport GmbH &Co. KG
31. Safety
Safety is the First Commandment when ying any model
aircraft. Third party insurance is mandatory. If you join a
model club, suitable cover will usually be available through
the organisation. It is your personal responsibility to ensure
that your insurance is adequate (i.e. that its cover includes
powered model aircraft). Make it your job to keep your
models and your radio control system in perfect order at all
times. Check and observe the correct charging procedure
for the batteries you are using. Make use of all sensible
safety systems and precautions which are advised for
your system. An excellent source of practical accessories
is the MULTIPLEX main catalogue or our website www.
multiplex.de
MULTIPLEX products are designed and manufactured
exclusively by active modellers for practising modellers.
Always y with a responsible attitude. You may think that
Parts List TwinStar-BL KIT # 21 4279
Part No. Description Material Dimensions
No. off
1 1 Building instructions Paper, 80 g / m² A4
2 1 Decal set Printed adhesive lm 750 x 1000 mm
3 1 L.H. fuselage shell Moulded Elapor foam Ready made
4 1 R.H. fuselage shell Moulded Elapor foam Ready made
5 1 Canopy Moulded Elapor foam Ready made
6 1 L.H. wing panel Moulded Elapor foam Ready made
7 1 R.H. wing panel Moulded Elapor foam Ready made
8 1 L.H. spar cover Moulded Elapor foam Ready made
9 1 R.H. spar cover Moulded Elapor foam Ready made
10 1 Tailplane Moulded Elapor foam Ready made
11 1 Fin Moulded Elapor foam Ready made
Small items set
20 3 Hook-and-loop tape, hook Plastic 25 x 60 mm
21 4 Hook-and-loop tape, loop Plastic 25 x 60 mm
22 2 Canopy-Lock latch Inj. moulded plastic Ready made
23 2 Canopy-Lock latch tongue Inj. moulded plastic Ready made
24 4 Glue-tting horn Inj. moulded plastic Ready made
25 4 Pushrod connector Metal Ready made, 6 mm Ø
26 4 Washer Metal M2
27 4 Nut Metal M2
28 4 Socket-head grubscrew Metal M3 x 3 mm
29 1 Allen key Metal 1.5 mm A/F
30 2 Pre-formed aileron pushrod Metal 1 Ø x 70 mm
31 2 Wing retainer Inj. moulded plastic Ready made
32 2 Screw Plastic M5 x 50 mm
33 2 Wing retainer screw plate, A Inj. moulded plastic Ready made, M5
34 2 Wing retainer screw plate, B Inj. moulded plastic Ready made, M5
Wire and rod set
40 1 Wing joiner tube GRP tube 10 Ø x 620 mm
41 1 Steel elevator pushrod, pre-formed end Metal 0.8 Ø x 770 mm
42 1 Steel rudder pushrod, pre-formed end Metal 0.8 Ø x 720 mm
43 1 Elevator snake outer sleeve Plastic 3 / 2 Ø x 700 mm
44 1 Rudder snake outer sleeve Plastic 3 / 2 Ø x 700 mm
45 1 Elevator snake inner sleeve Plastic 2 / 1 Ø x 730 mm
46 1 Rudder snake inner sleeve Plastic 2 / 1 Ø x 730 mm
47 1 Aerial sleeve Plastic 3 / 2 Ø x 700 mm
Motor mount TwinStar-BL incl. screws
60 2 Motor bulkhead Metal Ready made
61 2 Motor bracket Inj. moulded plastic Ready made
62 4 Screw Metal M3 x 6 mm
63 8 Screw Metal 2.2 x 13 mm
GB