Instructions

20
Parts List KIT Lentus # 1-00899 + RR Lentus # 1-00900
Foam parts
Small parts set
No. KIT RR Description Material Dimensions
1-1 1 1 Building instructions, KIT
1-2 0 1 Supplementary instructions, RR
1-3 1 1 Model complaint notication
1-4 1 1 Notes on air trafc regulations
2 1 1 Decal sheet, motifs (A) Printed self-adhesive lm 670 x 930 mm
3 1 1 Decal sheet, name placards (B) Printed self-adhesive lm 220 x 280 mm
4 1 1 Fin sticker White self-adhesive lm 80 x 80 mm
5 1 1 Seat + instruments decal sheet Printed self-adhesive lm 90 x 310 mm
6 1 1 Clear canopy Vac.-moulded plastic, trimmed Ready made
7 1 1 Landing skid Self-adhesive lm Ready made
No. KIT RR Description Material Dimensions
10 1 1 L.H. fuselage shell Moulded Elapor foam Ready made
11 1 1 R.H. fuselage shell Moulded Elapor foam Ready made
12 1 1 Fuselage in-ll piece (wheel well) Moulded Elapor foam Ready made
13 1 1 Canopy frame Moulded Elapor foam Ready made
14 1 1 Tailplane Moulded Elapor foam Ready made
15 1 1 L.H. wing panel Moulded Elapor foam Ready made
16 1 1 R.H. wing panel Moulded Elapor foam Ready made
17 1 1 Rudder Moulded Elapor foam Ready made
18 1 1 Rudder cover Moulded Elapor foam Ready made
No. KIT RR Description Material Dimensions
20 3 2 Hook-and-loop tape, hook Plastic 25 x 60 mm
21 3 2 Hook-and-loop tape, loop Plastic 25 x 60 mm
22 2 2 Latch catch Injection-moulded plastic Ready made
23 2 2 Latch tongue Injection-moulded plastic Ready made
24 2 2 Cable-tie holder Plastic 12 x 30 mm
25 1 1 Battery retaining strap Plastic 16 x 200 mm
26 5 5 “Twin” control surface horn Injection-moulded plastic Ready made
27 5 5 Barrel connector Metal Ready made, 6 mm Ø
28 5 5 Socket-head grubscrew Metal M3 x 3 mm
29 1 1 Allen key Metal 1.5 A/F
30 2 2 Pre-formed aileron pushrod Metal 1 Ø x 50 mm
31 1 1 Pre-formed rudder pushrod Metal 1 Ø x 50 mm
32 2 2 Pre-formed flap pushrod Metal 1 Ø x 80 mm
33 1 1 Pre-formed aero-tow release pushrod Metal 1 Ø x 105 mm
34 1 1 Aero-tow release sleeve Ready made plastic 3.2 Ø x 90 mm
35 1 1 Pre-formed elevator pushrod Metal M2, 1.7 Ø x 121 / 10 mm
36 1 1 Clevis Metal M2
37 2 2 Plastic screw Injection-moulded plastic M5 x 35 mm
38 2 2 Nut Metal M5
39 4 4 Wing retaining clip screw Metal 2.2 x 6.5 mm
40 1 1 Trim weight Ball bearing 15 Ø mm / 13.8 g
41 4 4 O-ring UV-resistant plastic 8 x 2 mm
42 5 5 Cable-tie Plastic 98 x 2.5 mm
43 1 1 Tailwheel axle Metal 2 Ø x 18 mm
44 2 2 Tailwheel washer Injection-moulded plastic 2.4 I.D., 6 O.D. x 1 mm
EN