Instructions

18
Accessories and tools
Contents
Specications
Required accessories
KIT # 1-00899
Optional accessories
RR # 1-00900
Wingspan: 3000 mm
Overall length: 1410 mm
All-up weight: approx. 2300 - 2600 g
Total surface area:
approx. 52,6 dm²
Total surface area
loading:
approx. 44 - 49 g/dm²
Control channels: 7 optional 9
RC functions: Elevator, rudder, ailerons, aps, throttle, optio-
nal retractable landing gear, tow coupling
Flight time:
up to about 30 min. without thermal assistance
• 1x ROXXY EVO LiPo 3 - 2600M 40C with BID-Chip # 316656
• 1x ROXXY EVO LiPo 3 - 3200M 30C with BID-Chip # 1-00482
• 1x Lentus power set incl. folding propeller 11" x 7" # 1-01183
• 1x RX-7 light receiver # 55810
• 1x Servo set Lentus with M6 / UNI cable set # 1-01288
• 1x Multiplex Zacki2 ELAPOR 20g (Blister) # 1-01291
• 1x Multiplex Zacki ELAPOR super liquid 10g VE1 # 852728
• Moulded ELAPOR
®
parts for fuselage, wing, tail panels and cabin
frame, canopy glass
• all plastic parts, small items and linkage components required to
assemble the model
• spinner
• propeller driver
• taper collet
• die-cut decal sheet
• comprehensive instructions
• Factory-assembled ELAPOR
®
model
• including ROXXY C35-48-990kv motor
• ROXXY BL-Control 755 S-BEC speed controller
• 11 x 7" folding propeller
• 6 x HS-65HB Carbonite servos
• factory-installed M6 quick-release cable set
• decals applied
• comprehensive instructions
Required tool
• Blade knife
• Side cutter
• Screwdriver (for M3)
• Socket wrench SW 13
• Hot glue
• 1x Retractable undercarriage Lentus
(Kit with Ø70mm wheel)
# 1-01759
• 1x Servo HS-85MG # 112086
• 1x ROXXY EVO LiPo 4-2600M 40C
(ground take-off with 8 x 6" Prop.)
# 1-01025
• 1x 2 folding propeller blades 8" x 6"
(ground take-off with 4S)
# 1-01970
• 1x
COCKPIT SX 9 transmitter # 45161
• 1x RX-9 M-LINK 2.4 GHz receiver, telemetry-capable # 55812
• 1x Receiver, WINGSTABI RX-9-DR M-LINK # 55013
• 6x HS-65HB Carbonite servo # 112065
• 1x Lentus M6 / UNI cable set (complete) # 1-01286
• 1x ALUMINIUM spinner, 54 mm Ø with 5 mm Ø taper
collet, FunRay Tuning
# 1-00481
• 1x
Model bag sailors up to 3,2m (e.g. Lentus/Antaris) # 1-01634
• 1x ROXXY Smart Control 70 MSB speed controller # 318579
• 1x HITEC Multicharger X1 RED # 114131
• 1x MPX M6 charge lead # 92516
• 1x Vario / altimeter sensor # 85416
• 1x TEK-Vario u.TAS (TrueAirspeed) sensor # 1-00667
• 1x GPS sensor for M-Link receiver # 85417
• 1x Flight Recorder # 85420
• 1x Glider fuselage nose (for glider version) # 224350
• 1x Tow-release (for glider version) # 723470
• 1x Velcro strap small, for 2-4S LiPo (3 pieces) # 1-00871
EN