User manual

50
Highest]
AREA SET: Click『Set Up』to open sub window and configure motion area
block by block. Left Click to change state, blue color means enable motion
detection. Transparent color mean disable.
 EVENT HANDLE：
◦ TRIGGER RECORD: when curtain channel has motion triggered,
DVR can record multiple channels.
◦ TRIGGER ALARM OUTPUT: Enable or disable alarm output when
motion triggered.
◦ SOUND ALARM: Enable buzzer output when motion triggered.
Email NOTIFY: Enable or disable email sending when motion
triggered
5.5.3 『CHANNEL PARAMETER』TAB
 CHANNEL NO: Click ▼ icon to select channel number to apply setting.
 VIDEO QUALITY SETUP:
◦ STREAM TYPE: Click to select only video steaming or
video + audio streaming (MULTI STREAM)
◦ RESOLUTION: Click to select CIF /Half D1 /D1.
◦ VIDEO BITRATE: Click to select from 8 different bitrate → 256K
/384K /512K /640K/768K /1M /1.5M /2M bps。
◦ FRAME RATE: Click to select from 6 different frame rate→ 1 /3 /6
/12/25 /30 FPS
◦ RECORD SCHEDULE:
Each block represents 『1 Hour』in a day. Click left mouse to change
state in sequence of each block. Drag mouse on curtain block and copy
state to other block. Each color’s define were described in the window.