User manual

• FIRMWARE UPGRADE: DVR firmware can upgrade via network. Click

“BROWSE” to fine the firmware in PC, click “START UPGRADE” to

upload new firmware to remote DVR. PROGRESS will show the upgrade

status.

• RESET TO DEFAULT/HDD OVERWRITE: same as DVR OSD Set up

• CAPTURE PATH: set up the folder to save snap shot

5.5.2 『CHANNEL SETTING』TAB

 CHANNEL NO: Click ▼ icon to select channel number to apply setting.

 CHANNEL NAME: Input name or description of camera..

 PTZ SETUP:

Baud Rate: Click ▼ icon to select PTZ baud rate from 1200 /2400

/4800/9600bps

Protocol: Click ▼ icon to select PTZ protocol from 『SAMSUNG、

PelcoD 、PelcoP、Panasonic』.

PTZ Speed: Click ▼ icon to select camera speed from 01~16.

Bigger value mean camera move fast.

PTZ ID：PTZ camera ID address. Please check ID address from camera.

 MOTION DETECT: Click □ to enable or disable function.

 Mean motion detection enabled.

SENSITIVITY: Click ▼ icon to selects from [Low, Middle, High, and