Integration Instructions

1-01256 TRINITY F9+ Assembly Specification V2
Release-date: 2019-08-20 I
1 General references
 This document may not be handed on to any third party without the explicit clearance from
MULTIPLEX.
 This specification is written and designated for skilled users with substantial technical capabilities.
 Indications of horizontal, vertical or longitudinal position are always meant in the direction of flight
at normal attitude.
 Item descriptions in the text are written in bold italic letters.
 The pictures do not necessarily show the latest version of parts and tools. This does not affect the
technical principal of the assembling procedure.
 All D-Sub-connectors of the harnesses are installed with the wide side of the connector on top, the
narrow side on the bottom.
 Persons assembling the Trinity have to wear antistatic shoes.
 All finished Trinity Parts need at least 24h for evaporation. Do not store the finished parts in the
transport cases before, to avoid deposition of CA fumes on surfaces.
 Consumables (e.g. CA glue, LOCTITE) may not be used after expiration date.
Excerpt from Trinity Assembly Specification V2