Installation Instructions
Trinity user manual |
13
7 QBase – ground control station
7.1 INSTALLING / UNINSTALLING QBASE
The following chapter will deal with the installating and the uninstalling of QBase.
7.1.1 Install QBase
1. QBase is provided by your reseller.
2.2SHQWKH4%DVHLQVWDOOHUƓOHDQGIROORZWKHLQVWUXFWLRQVRIWKHLQVWDOODWLRQJXLGH
3. Open Start QBase to open the program.
Note: For the connection between QBase and the Trinity via the QBase modem a driver is required.
Visit www.ftdichip.com/Drivers/VCP.htm to install the driver.
MINIMUM SYSTEM REQUIREMENTS
OS Windows 7 / 8.1 / 10 64bit
CPU-Speed 2.5 GHz or higher (Hyper-threading or Multicore recommended)
RAM 4 GB or higher
Free Disk Space 100 MB
Display 24-bit color depth
Screen Resolution 1600 x 900 recommended or higher at normal size (96 dpi)
Video / Graphic Adapter 64 MB RAM minimum, 256 MB RAM recommended; NVIDIA, AMD, and Intel chipsets supported;
Accelerated graphics card driver; Be sure to use the latest available driver
If you have problems starting QBase, make sure your installation of Microsoft Windows is up to date.
7.1.2 Uninstall QBase
1. Open the QBase installer and select Remove QBase.
2. Select Finish to remove QBase.
Alternative: Uninstall QBase from the program list of the Windows control panel.