Cut Sheet

NOTE: Special orders are non-cancelable, non-returnable and
non-refundable
www.alliedeg.com
16100 S. Lathrop Ave., Harvey, IL 60426
Phone / 708.339.1610 • Toll-Free / 800.882.5543
Manufactured for Long Life
Allied Tube & Conduit
®
EMT is precision manufactured
from high grade mild strip steel for exceptional durability
and long-lasting life. Allied EMT is hot galvanized using a
patented inline Flo-Coat
®
process. This process combines
zinc, a conversion coating, and a clear organic polymer
topcoat to form a triple layer of protection against corrosion
and abrasion.
E-Z Pull
®
EMT combines strength with ductility, providing easy
bending, cutting and joining while resisting flattening, kinking and
splitting. Available in sizes 1/2 (16) - 4 (103).
Coatings
Allied’s EMT (Electrical Metallic Tubing) has a special low
friction ID coating called E-Z Pull that greatly improves the slip
properties between conduit and wire. With
E-Z Pull EMT, wire pulls through the EMT smoothly and easily,
making installation easier and faster.
EMI Shielding
Allied EMT is very effective in reducing electromagnetic
field levels for encased power distribution circuits, shielding
computers and other sensitive electronic equipment from the
effects of electromagnetic interference.
For more information on EMT shielding, visit
www.alliedeg.com to obtain the GEMI (Grounding and Electro-
Magnetic Interference) software analysis program .
Codes & Standards Compliance
Allied EMT is listed to Underwriters Laboratories Safety
Standard UL 797 and meets ANSI C80.3. These standards
have been adopted as federal specifications in lieu of WWC
563. EMT is recognized as an equipment grounding conductor
by NEC Section 250-118. Documentation for compliance with
NEC Article 250 is also available in the GEMI (Grounding and
Electro-Magnetic Interference) analysis software and related
research studies found at the www.alliedeg.com website.
Installation of EMT shall be in accordance with the National
Electrical Code and the UL listing information. Allied EMT is
listed in category FJMX. Master bundles conform to NEMA
Standard RN2.
Specification Data
To specify Allied EMT, include the following: Electrical Metallic
Tubing shall be equal to that manufactured by Allied Tube &
Conduit Corporation. EMT shall be hot galvanized steel O.D.
with an organic corrosion resistant I.D. coating, and shall
be listed to UL Safety Standard 797 and manufactured in
accordance with ANSI C80.3.
Electrical Metallic Tubing (EMT) and True Color
™
EMT
in mm in mm lb kg ft m ft m
1/2 16 0.706 17.93 0.042 1.07 30 13.6 7000 2135 3500 1066.8
3/4 21 0.922 23.42 0.049 1.24 46 20.9 5000 1525 2500 762.0
1 27 1.163 29.54 0.057 1.45 67 30.4 3000 915 1500* 457.2
1-1/4 35 1.510 38.35 0.065 1.65 101 45.8 2000 610 2000 609.6
1-1/2 41 1.740 44.20 0.065 1.65 116 52.6 1500 457.5 1500 457.2
2 53 2.197 55.80 0.065 1.65 148 67.1 1200 366.0 1200 365.7
2-1/2 63 2.875 73.03 0.072 1.83 216 98.0 610 186.1 610 185.9
3 78 3.500 88.90 0.072 1.83 263 119.3 510 155.6 510 155.4
3-1/2 91 4.000 101.60 0.083 2.11 349 158.3 370 112.9 370 112.7
4 103 4.500 114.30 0.083 2.11 393 178.3 300 91.5 300 91.5
1
Outside diameter tolerances: +/- .005 in. (.13mm) for trade sizes 1/2 (16mm)
through 2 (53mm);
+/- .010 in. (.25mm) for trade sizes 2-1/2 (63mm);
+/- .015 in. (.38mm) for trade size 3 (78mm);
+/- .020 in. (.51mm) for trade sizes 3-1/2 (91mm) and 4 (103mm).
FEATURES & SPECIFICATIONS
*Blue trade size 1 master bundle size: 3000 ft / 915 m
** Other Color Trade Sizes 2 - 4 are available thru special order
NOTE: Length = 10 ft. (3.05m) with a tolerance of +/- .25 in. (6.35 mm)
Trade
Size
Metric
Designator
Approximate
Weight Per
100 Ft. (30.5M)
Outside
Diameter
1
Nominal Wall
Thickness
2
Red and Galvanized
Master Bundle
Quantity
True Color**
Bundle Qty.
Electrical Metallic Tubing (EMT) and True Color™ EMT
L isted to Underwriters Laboratories Safety Standard UL 797
Manufactured in accordance with ANSI C80.3