ARRA Compliant

Table Of Contents

Experience the Republic Difference

January 2, 2009

Manufactured By: Republic Conduit

Certificate of Origin and Material Test Report

This is letter certifies that electrical steel conduit labeled as Republic Conduit is manufactured in the United States. The

conduit is formed from flat rolled steel and is either Hot-Dip Galvanized or Electrogalvanized. The material labeled as

Republic Conduit conforms to the following specifications:

Galvite® Electrical Rigid Metal Conduit-Steel (Galvite® ERMC-S)

• ANSI Standard -- C80.1.

• UL Standard -- UL 6 Fourteenth Edition, the common ANCE, CSA and UL (trinational) standard for Electrical Rigid

Metal Conduit-Steel, covering requirements for Mexico, Canada, and the United States.

• Federal Specification WW-C-581 (Class 1 Type A). This Federal specification may still be referenced; however, the

federal government has cancelled it and adopted the UL 6 standard.

• All sizes are manufactured in the U.S.

• Trade sizes range from ½” to 6”.

Electrunite® Electrical Metallic Tubing (EMT)

• ANSI Standard -- C80.3.

• UL Standard -- UL 797 Fourteenth Edition, the common ANCE, CSA and UL (trinational) standard for Electrical

Metallic Tubing-Steel, covering requirements for Mexico, Canada, and the United States.

• Federal Specification WW-C-563. This Federal Specification may still be referenced; however, the federal

government has canceled it and has adopted the UL 797 and ANSI C80.3 standards.

• All sizes are manufactured in the U.S. Smaller EMT sizes (½”, ¾”, and 1”) are produced at our Cedar Springs, GA

facility, and the larger sizes are made at our Louisville, KY plant.

• Trade sizes range from ½” to 4”.

Intermediate Metal Conduit (IMC)

• ANSI Standard -- C80.6.

• UL Standard -- UL 1242 Fourth Edition, for Electrical Intermediate Metal Conduit-Steel.

• Federal Specification WW-C-581 (Class 2 Type A). This Federal Specification may still be referenced; however, the

federal government has canceled it and has adopted the UL 1242 standard.

• All sizes are manufactured in the U.S. Smaller IMC sizes (½”, ¾”, and 1”) are produced at our Cedar Springs, GA

facility, and the larger sizes are made at our Louisville, KY plant.

• Trade sizes range from ½” to 4”.

Aluminum Rigid Conduit

• ANSI Standard -- C80.5.

• UL Standard -- UL-6A, of 2004, UL514B.

• Federal Specification WW-C-540c.

• All sizes are manufactured in the U.S.

• Trade sizes range from ½” to 6”.

7301 LOGISTICS DRIVE | LOUISVILLE, KY 40258 | USA | P 800-840-8823 | F 502-995-5873