Cut Sheet

Description
STABILOY® MC Cable’s construction consists of either
three or four insulated phase-identified conductors
plus a bare equipment-grounding conductor inside
interlocked aluminum alloy armor. All conductors are
STABILOY® (AA-8030 electrical grade alloy) with type
XHHW-2 insulation. STABILOY® MC Cable is a
UL Listed assembly.
Marking
The cable assembly is identified with a marker tape
placed under the wrapping tape. The legend on the
marker tape includes, ALCAN TYPE MC-ST1 STABILOY
®
AA-8030 AL 600 V (UL) FOR CT USE (NOT “ST1” ON
JACKETED MC UNLESS SO MARKED) NOM ANCE
“SEQUENTIAL FOOTAGE”. STABILOY
®
MC Cable
with jacket is available upon request.
Applications
Feeder size STABILOY® MC Cable is a better alternative
to the traditional pipe and wire method because it
dramatically reduces installation time. STABILOY® MC
Cable is approved for use in many applications including
cable tray, power lighting and signal circuits as well as in
hazardous locations as permitted in articles 501, 502,
503 and 504. Ideal applications include:
• Hotels • Hospitals
• Casinos • Commercial Buildings
• Condominiums/ • Schools
Apartments/Loft Buildings • Renovations
• Sports Arenas
Approved for use in the following locations
Without PVC Jacket over Armor:
• For services, feeders and branch circuits
• For power lighting and signal circuits
• Indoors
• Where exposed or concealed
• In cable tray
• As open runs of cable
• In hazardous locations
• In dry locations and embedded in plaster finish
on brick or other masonry except in damp or
wet conditions
• Interior temporary power
Applications
Top: Venetian Hotel – Las Vegas, Nevada
Bottom: Georgia Dome – Atlanta, Georgia