Cut Sheet

1-866-663-9267
4
ÕÕÊÌiÀVÊÀÀi`Ê*ÜiÀÊ>`ÊÌÀÊ>Li
q{äcÊÉʳäcÊÀ>Ìi`ÊÊi>`ÊÀii
ÕÌ«iÊV`ÕVÌÀÃ]ÊÜÌÊ}ÀÕ`ÊÜÀi]ÊiÀÊ*6Ê>ViÌ]Ê
>ÕÕÊÌiÀVi`Ê>ÀÀ]ÊÕÌiÀÊ*6Ê>ViÌ
TECK90
Construction
Conductor: bare, annealed copper
Class B stranded in accordance with
ASTM B8. In sizes 8 AWG to 1000
kcmil, the conductors are compact
stranded to reduce cable diameter and
weight.
Conductor Shield: extruded semi-
conducting cross-linked polyethylene
is applied for cables rated over 1000
volts.
Insulation: cross linked polyethylene.
Meets CSA C22.2 No. 38 type RW90
for unshielded cables rated 5 kV or less.
Assembly: conductors are cabled
in concentric layers with grounding
wire, interstices are filled with suitable
non-hygroscopic fillers, as required.
A binder tape of synthetic material
assembles the core in an essentially
round configuration, as required.
Inner Jacket: black polyvinyl chloride
jacket per CSA C22.2 No. 131-07,
90°C temperature rating, flame-
retardant, low-acid-gas-emitting.
Armor: interlocking aluminum tape
armor applied directly over the inner
jacket.
Outer Jacket: overall polyvinyl
chloride jacket per CSA C22.2 No.
131-07; low acid gas emission; limited
flame spread and excellent corrosion
resistance. Jacket color is black for 600 V
and 1 kV cables, orange for
5 kV cables.
Conductor Identification
1 conductor: black
2 conductors: black, white
3 conductors: red, black, blue
4 conductors: red, black, blue, white
5 or more: number coding
Composite:
Power: color coded
Control: number coded
For color coding:
14 AWG to 2 AWG: colored insulation
1 AWG and larger: printed color stripe
Bending Radius
Fixed position:
Unshielded Cables: 7 × cable overall
diameter
Shielded Cables: 12 × cable overall
diameter
During pulling:
Twice the above values
Specifications
UÊiiÌÃÊÌiÊÀiµÕÀiiÌÃÊvÊ-Ê
C22.2 No. 38 type RW90 for
unshielded conductors
UÊiiÌÃÊ-ÊÓÓ°ÓÊ °Ê£Î£äÇÊÌÞ«iÊ
TECK Cables up to 5 kV unshielded
UÊÌÀÊV>LiÃÊiiÌÊ-ÊÓÓ°ÓÊ
No. 239-97(R2006).
*À`ÕVÌÊvi>ÌÕÀiÃÊ
UÊ>LiÃÊ>ÀiÊ-ÊÃÌi`Ê>ÃÊ/Þ«iÊ/Ê
(for cables up to 5 kV)
UÊ-ÊÃÌi`ÊÃÕ>Ìi`ÊV`ÕVÌÀÃ
UÊ>LiÃÊ>ÀiÊy>iÀiÌ>À`>ÌÊ>`Ê«>ÃÃÊ
CSA FT1
UÊ>LiÃÊ>ÀiÊwÀiÀiÌ>À`>ÌÊ>`Ê«>ÃÃÊ
CSA FT4
UÊÊ/ÓxÓäÊÀiÊ/iÃÌÊ>ÌÊÓ£ä]äääÊ
BTU/hr, IEEE 1202, 383 and UL
1685
UÊ>LiÃÊ>ÀiÊÜ>V`}>ÃiÌÌ}Ê«iÀÊ
CSA C22.2 No. 0.3-01 and marked
AG14
UÊÊ>LiÃÊiÝLÌÊ>Êq{äcÊÜÊ
temperature rating with suitable
precautions
UÊ/i«iÀ>ÌÕÀiÊÀ>Ì}ÊvÊäcÊ`ÀÞÊ>`Ê
wet
UÊ£ÎäcÊiiÀ}iVÞÊÀ>Ì}Ê>`ÊÓxäcÊ
short circuit rating
UÊ>LiÃÊ>ÀiÊÀ>Ìi`ÊvÀÊ>â>À`ÕÃÊ
Locations (HL) per CSA C22.2 No.
174-M1987(R2008)*
UÊÝViiÌÊiV>V>Ê>`Ê«ÞÃV>Ê
properties
UÊ-Õ}ÌÊ>`ÊÊÀiÃÃÌ>ÌÊ>ViÌ
UÊi>`ÊÀiiÊ>`Ê,-ÊV«>Ì
UÊ-ÕÌ>LiÊvÀÊ`ÀiVÌÊLÕÀ>]ÊÕÃiÊÊV>LiÊ
tray and embedment in concrete
Options
The following constructions can be
provided on special orders:
UÊÕÕÊV`ÕVÌÀÃ
UÊ-ÌiiÊÌiÀVÊ>ÀÀ
UÊÝÌÀ>Ê}ÀÕ`ÊÜÀiÃ
UÊ-«iV>ÊVÀÊÀÊÕLiÀÊV`}
UÊ-«iV>ÞÊVÀi`Ê>ViÌÃ
UÊ"ÌiÀÊVÃÌÀÕVÌÃÊ>`ÊVL>ÌÃÊ
(some manufacturing restrictions
apply)
*Note: These cables cannot be used
in Class I or II Division 1 locations in
accordance with the N.E.C.