Manualshelf

Instructions / Assembly

ManualsBrandsMultinautic ManualsBuilding materialsFloating Dock Kit
1
HD FLOATING DOCK SECTION
8' (or 10') x 12' or 6' (or 8') x 16'
Material needed to complete assembly
qty
qty
Lumber Side piece
144'' (12') 2 144'' (12') 2
Inside Joist
140-3/4'' 2 140-3/4'' 2
Central cross member
29-7/8" 6 37-7/8" 6
End Piece
92-3/4'' 2
116-3/4"
2
Decking
96'' (8') 24
120" (10')
24
Float support
96'' (8') 4
120" (10')
4
Fastening
& bolting
Carriage Bolt, lock washer & nut
3/8'' x 3'' 56 3/8'' x 3'' 56
Carriage Bolt, lock washer & nut
1/2'' x 3'' 24 1/2'' x 3'' 24
Lag screw (for floats)
3/8" x 4" 16 3/8" x 4" 16
Flat washer (for floats)*
1/2" 16 1/2" 16
Flat washer (for chain holders & floats)**
3/8'' 24 3/8'' 24
Wood screw (assembly & decking -8/plank) #10 x 3'' 264 #10 x 3'' 264
qty
qty
Lumber Side piece
192" (16') 2 192" (16') 2
Inside Joist
188-3/4" 2 188-3/4" 2
Central cross member
21-7/8" 6 29-7/8" 6
End Piece
68-3/4" 2
92-3/4"
2
Decking
72'' (6') 33 96'' (8') 33
Float support
72'' (6') 4 96'' (8') 4
Fastening
& bolting
Carriage Bolt, lock washer & nut
3/8'' x 3'' 56 3/8'' x 3'' 56
Carriage Bolt, lock washer & nut
1/2'' x 3'' 24 1/2'' x 3'' 24
Lag screw (for floats)
3/8" x 4" 16 3/8" x 4" 16
Flat washer (for floats)*
1/2" 16 1/2" 16
Flat washer (for chain holders & floats)**
3/8'' 24 3/8'' 24
Wood screw (assembly & decking -8/plank) #10 x 3'' 336 #10 x 3'' 336
Please read "Anchoring techniques & Suggestions on How to anchor a dock system" to evaluate your anchoring needs.
item: #19217
** Since chain holder has holes for 3/8" dia. bolts and that we are using the big 1/4" thick HD corner, which has bigger
holes, you will need to add 3/8" flat washers to combine those parts.
* To have a nice uniform pressure on float corners, you will use 2 sizes of flat washers: 3/8" & 1/2" on each lag screw.
8' x 12'
10' x 12'
6' x 16'
8' x 16'

Summary of content (1 pages)