Technical data

INPUTS
OTHER FEATURES
45 FILTER
Allows external voltage control of the cutoff
frequency of the filter. Scaling is 0.95 volts/octave.
Input impedance is 100K.
50 ACCESS PWR
Supplies +15 volts regulated D.C. power for all
standard Moog accessories. Absolute maximum
current = 50 mA.
46 OSC
Allows external voltage control of the
frequency of the audio oscillator. Scaling is 0.95
volts/octave. Input impedance is 100K.
51 LINE VOLTAGE SELECTOR
This switch selects for operation at 115 or 230
volt line current for worldwide use of theMultimoog.
47 S-TRIG
Switch closure triggers contour generators.
Internal circuit removes switch bounce. Input
impedance = 100K.
48 AUDIO
Allows external sound source to be processed
through the synthesizer. Any audio signal routed to
this input appears at the audio input of the FILTER
section. lOOmV RMS input required for full drive.
Input impedance = 4.7K.
52 POWER SWITCH
Selects to turn power. ON and OFF.
53 FINE TUNE
Parallels OCTAVE and WIDE FREQ controls on
front panel to provide fine tuning. Provides greater
than one whole step above or below center pitch.
49 TOUCH MOD EFFECTS
Allows input of external signal into the MOD
path of the KEYBOARD TOUCH section (in lieu of
MODULATION section signal). Functional only when
the EFFECT switch on the front panel is to MOD.
80