User guide

M349 Announcer version 01.02 revised 4 August 2005 page 7
M394 V01.02
22 July 2005
When the M349 is first switched on this is the in-
formation that appears on the screen. The date is
when the software was created. Check that the
version is the same as at the foot of this page.
After a few seconds you will see. This should take
approximately 30 seconds.
memory check
please wait ..
Pick up the local telephone handset. You will hear
a tone, indicating that the announcement for this
port has not been recorded.
M349 version 01.02
0 calls
The numbers will vary, depending on the amount
of memory installed in your unit.
Memory top 8FFF
size 1000
Press # # # # To check the status of the
ports. Starting with port 0 the local control hand-
0aannn..........
................
Press ∗ and replace the handset.
M349 version 01.02
0 calls
0 = Online.
. = not equipped.
a = analogue.
n = analogue with dial tone clearing.
You are now ready to set the system up to answer your callers. Go to Read This First.
Watch the display and check that it shows the information as follows: