User guide

M349 Announcer version 01.02 revised 4 August 2005 page 21
Ring delay
Review or change the time before an incoming call is answered.
Lift handset press # # . From this 2
nd
menu press 7 (hidden key)
1-Delays 2-Enable
3-Guard 4-Reset #→
1 for Delays.
1 for Ring
Delay?
1-Ring 2-Tone *-Quit
1..99 seconds.
# to accept
or ∗ to quit.
Ring delay = 01 sec
0..99 #-accept
Clearing to dial-tone delay
Review or change the time dial-tone has to be present before an incoming
call is cleared. If the time is short, noise from the caller may cause
premature clearing. If the time is long, you could experience false calls,
where callers hang up during the announcement and the disconnect clear
signal from the PSTN is not presented. Only change from the default value
of 5 seconds if you are experiencing problems.
Lift handset press # # . From this 2
nd
menu press 7 (hidden key)
1-Delays 2-Enable
3-Guard 4-Reset #→
1 for Delays.
2 for Tone clear.
Delay?
1-Ring 2-Tone *-Quit
0.1..9.9 seconds.
# to accept
or ∗ to quit.
Tone delay = 5.0 sec
0.1..9.9 #-accept