User guide

M349 Announcer version 01.02 revised 4 August 2005 page 20
Enable number of announcement plays or disable ports from
answering
Change or review the number of times the announcement will be repeated to
callers for a range ports.
Lift handset press # # . From this 2
nd
menu press 7 (hidden key)
1-Delays 2-Repeats
3-Guard 4-Reset #→
2 for Repeats
# to review next range of ports.
(Only if different settings have been
used)
Or 1 .. 7 for number of repeats.
Or 0 to stop ports from answering
Or 9 to answer from ‘Ring Start’
and repeat playing until a clear
signal is received.
Or 8 to answer from ‘Loop Start’
repeat playing. A clear signal will re-
start the announcement.
Or ∗ to quit.
00.. 05 play 1 times
0..9 to alter #-next
0 ..5 for start of range.
# to accept
0 ..5 for start of range.
# to accept
Enable 0 plays
to ports 0.. 5
04.. 05 play 3 times
0..9 to alter #-next
The display will not change if all ports are the same when reviewing
Number of repeats blinks.
00.. 05 play 2 times
0..9 to alter #-next
after 0..9 press, # to accept
Or ∗ to quit.
00..05 not to answer
calls #→
Enable 0 plays
to ports 4.. 5
Enable 0 plays
to ports 4.. 4
∗ to return to the 1
st
menu.
Press 1-Record
2-Play/Assign #→
The peep-peep is played indicating that you are back at the main menu
again.