User guide

M349 Announcer version 01.02 revised 4 August 2005 page 17
Allow or bar remote control
Change or review the range ports allowed to control the system for making
changes such as new recordings or assign announcements to other ports.
At the time of installation remote control access will be barred.
Lift handset press # # . From this 2
nd
menu press 7 (hidden key)
1-Delays 2-Enable
3-Guard 4-Reset #→
3 for Guard.
1-Key Code
2- Security *-Quit
2 for Security.
Ports 01..5 remote=
barred 1-alter #→
1 .. 5 to select port for start of range.
# to accept.
Shows range of ports barred/allowed remote control
and offers start of the range.
1 to allow remote access. Or
# to review next range of ports.
Allow remote control
via ports? 01..05
Allow remote control
via ports? 01..5
1 .. 5 to select port for end of range.
# to accept.
offers end of the range.
Ports 01..5 remote=
allowed 0-alter #→
∗ ∗ to return to the 1
st
menu.
The peep-peep is played indicating that you are back at the main menu
again.