User guide

M349 Announcer version 01.02 revised 4 August 2005 page 10
Record- Play- Assign Announcements
Lift handset press # . From the main menu press 1 for record.
Or if the announcement exists.
After the tone, speak clearly into the handset.
The announcement you have just recorded is played.
The announcement is played repeatedly
The peep-peep is played indicating that you are back at the main menu
again..
Record ann 1
01..99 #-start
Enter announcement number
or press # to accept the one
offered.
Re-record 1 ?
0-next ∗-no #-start
Enter announcement number,
press # to re-record the one offered,
0 to find first available
or
∗ to end without re-recording.
Press # to start the recording.
Recording 1
free 1634 #-stop
Shows seconds of free recording
time available to you.
Press # to stop
or
∗ to pause, resume by pressing
∗ again.
1 Playing Time 14
#-Accept *Do again
Shows length of recording
in seconds.
Press # , to accept and review or change the assign-
ment,
or
∗ or any other key will discard your new recording.
Ann 1 assigned to
ports 0.. 1 #-next
Shows range of ports to which
this ann is currently assigned and
offers start of the range.
Press 1-Record
2-Play/Assign #→
Press # to accept
or
0..5 change the start of range,
or
∗ to exit without changing the assignment.
Press # to accept
or
0..5 change the start of range,
or
∗ to exit without changing the assignment.
Ann 1 assigned to
ports 0.. 1 #-next
Offers end of the range.