User guide

26
Setting up and cancelling
priority phone (call intercept)
You can intercept all incoming calls from the public exchange at one extension by giving priority
to that extension. All incoming calls will then ring the priority extension only However, if the
priority extension is engaged when an incoming call arrives , then all other extensions will ring
in the normal way. This function will over ride the incoming ring setting (see Setting Up The
Multi 4, later in this handbook) and when cancelled, the Default setting will be restored. If
priority is set on the same phone where the ring has been turned off, priority phone overrides
this programming option automatically.
To set priority phone
• Lift handset.
• Listen for internal dial tone.
• Dial 7 followed by own extension number
• Listen for confirmation tone.
• Replace handset.
• Your extension is now the Priority Phone
To cancel priority phone
• Lift handset of any extension
• Listen for internal dial tone
• Dial 70.
• Listen for confirmation tone.
• Replace handset
USING THE MULTI 5
7
INSTALLATION
Mounting The Multi 5 Box
• The Multi 5 box can be mounted horizontally or vertically on the wall, with a minimum of
75mm clearance arround the ventilation slots.
• Using the template supplied (see the centre of this handbook), locate and mark the centre
position of the two fixing screws. Drill, and if necessary, plug the fixing holes.
• Screw in the roundhead screw that will fit into the keyhole slot, so that the screw head
protrudes by approximately 2mm from the wall.
• Undo the retaining screw and remove the cover from the end of the box .
• Place the box over the screw you have placed in the wall, such that the screw drops into the
keyhole slot. Slide the box, to lock into position. If necessary adjust the screw to ensure that
the box is held firmly to the wall. Insert and screw the retaining screw.
Position of retaining screw
Key hole slot on rear of distribution box
WALL