User guide

Passive+Relay Version 8.19 page 9
Safety information
Please be aware of this important safety information before you install or operate your Multi-
Announcer. Only a simple telephone with tone dialling-such as the one supplied with the unit
is to be connected to the LOCAL HANDSET port (see page 9). If you connect any other type
of telephone, you may damage the unit and make it unsafe.
Your Multi-Announcer is supplied with a mains lead terminating in a moulded plug suitable for
connection to a typical 240 V AC mains socket (standard in the UK). Normally, you should not
attempt to remove this plug: however, if you need to fit a plug for operation outside the UK,
please make sure you follow these instructions;
♦ Connect the wire which is coloured BLUE to the terminal marked with the letter N or
coloured BLACK.
♦ Connect the wire which is coloured BROWN to the terminal marked with the letter L or
coloured RED.
♦ Connect the wire which is coloured GREEN AND YELLOW to the terminal marked with
the letter E or an EARTH SYMBOL, or coloured GREEN or GREEN AND YELLOW.
Fitting a plug
Green/Yellow
Blue wire
Cable clamp
Brown wire
Fuse