User manual

User Manual Guide Model: QR-130

Question 8: Why when I switch to Y/Pb/Pr 480P, 576P, 720P, 1080I, does the TV screen

display an unwatchable picture?

Question 9: Why is there no sound on movie or music playback when using Y/Pb/Pr

component output?

Question10: Why couldn’t the player find the hard disc?

Question11: Some functions like recording, time shift etc. do not work. What should I do?

Question 12: I cannot get SSID name, the screen always displays: Cant get any SSID!!

Please check if your TV supports Y/Pb/Pr 480P, 576P, 720P, 1080I output, if your TV does not support,

please use the A/V signal display instead, press the TV SYSYEM button on the remote control, NTSC

or PAL.

Y/Pb/Pr output is a video output only, and does not include sound signals, when using Y/Pb/Pr output,

please plug the A/V OUT or the S/PDIF jack to output sound.

Make sure the firmware is installed correctly, and no system partitions on the HDD were deleted. If

hard disc failure occurs, please backup your data and reinstall the firmware using the firmware in the

Driver CD which is provided along with the player.

If you find some functions do not work properly on the player, please change system settings to the

default (Refer to 6.6 for changing system settings).

When the WLAN USB Adapter is connected to the player, it needs some time to get initialized. Please

wait for about 1~2 minutes and try again. Then it will work properly.