User manual

User Manual Guide Model: QR-130
58
1
1
3
3
.
.
F
F
i
i
r
r
m
m
w
w
a
a
r
r
e
e
U
U
p
p
g
g
r
r
a
a
d
d
e
e
13-1 System information
In video-in Mode, please press ‘stop’ first, and ‘ pause’ button later, the player system information would
appears as follows including firmware version no.
13-2 Firmware Upgrade
If it is the first time that you are installing a SATA HDD (no matter it is a new one or an old one into the
player, please make sure you have read the following steps in advance.
Step 1: Backup Data
Please backup the data in the HDD before installing it into the player.
The following steps will format the hard disc, which will erase all data currently stored on the hard disc.
Step 2: Install the HDD
Follow the HDD Installation Guide, and install the HDD into the player.
Step 3: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 1 files from the firmware folder to
the root directory of your USB Pen Drive.
Step 4: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of the player.
Step 5: Connect the power cable and hold the power button
Plug the power cable into the DC IN jack, Press and hold the power button on the front panel, and do not
loosen. wait for about 5 seconds or more, and then loosen your finger on the power button; Firmware