The Movie what you really wanted to watch The Music which is your favorite The Photos which has your happy memories TV Drama which you would never miss Relax yourself wherever and whenever so far Ultimate Digital Multimedia Player “Movie Clip” User Manual Guide Model QR-130
User Manual Guide Model: QR-130 CONTENTS 1. Introduction.............................................................................................................................. 4 2. Product Specification ............................................................................................................. 5 3. Descriptions & Product Contents.......................................................................................... 7 3-1 Description .............................................
User Manual Guide Model: QR-130 10-6 Playlist ............................................................................................................................ 51 11. Media Recording................................................................................................................. 53 11-1 Recording from Video-In Mode .................................................................................. 53 11-2 Time Record Menu ..........................................................
User Manual Guide Model: QR-130 1. Introduction Thank you very much for purchasing this brand-new Multimedia Player QR130 with stronger function support. In the digital era, this product is quite suitable to be a home entertainment partner. With her outstanding designed features, you can enjoy movies and music, view photos of precious moments, and record your favorite TV or movie programs to make up for your regret of not being able to enjoy them in time.
User Manual Guide Model: QR-130 2. Product Specification GENERAL Dimensions 190.5(W) x 54(H) x 183.2(L)mm Power Supply AC 100~240V Power Consumption Approx. 35 W Operating Temperature +5°C to +35°C (+36°F to +95°F) Operating Humidity 5% to 80% RH Hard Disk SATA HDD SATA HDD Net Weight Approx 1.
User Manual Guide Model: QR-130 VIDEO OUTPUT SPECIFICATION 1 Vpp 75 Ohm Composite Output Y:1 Vpp 75 Ohm Components Output Cb:0.7 Vpp 75 Ohm Cr:0.7 Vpp 75 Ohm HDMI (Version 1.
User Manual Guide Model: QR-130 3. Descriptions & Product Contents 3-1 Description Front Panel 1 POWER Indicator (red) turns on when the system turns on. 2 REC indicator When Recording starts, this LED would shining in Blue. 3 HDMI When HDMI interface was working, the HDMI Led would be shining in Blue 4 IR: Infrared receiver window Receiving IR signals from the remote control. 5 HDD When reading HDD files from HDD, the HDD LED would be shinning.
User Manual Guide Model: QR-130 Rear Panel 1. Air Flow 8. USB SLAVE port (MINI USB) 2. Audio OUT jack (Left Channel) 9. Y/Pb/Pr OUT jack (Components Video) 3. AUDIO OUT jack (Right Channel) 10. S/PDIF Optical jack 4. VIDEO OUT jack 11. HDMI jack 5. AUDIO IN jack (Right and Left Channel) 12. USB HOST port x 1 6. VIDEO IN jack 13. DC IN jack 7.
User Manual Guide Model: QR-130 4.
User Manual Guide Model: QR-130 1 Power 2 Numeric botton Press to enter standby mode or wake up Press to enter channel numbers or numeric input when changing settings. 3 Press to jump to a specific point on a title. Specify the point GOTO using Title, Chapter and Time.
User Manual Guide Model: QR-130 17 SETUP Press to access the Setup Menu directly. 18 MUTE Press to mute audio output, and press again to resume 19 GUIDE Press to view the Guide menu, it is the player’s home page. 20 INFO Popup video information during Video Play. 21 SEARCH Popup random access OSD during Video Play 22 SKIP FORWARD Press to fast forward the current playback. Press repeatedly to select speeds. 23 SEARCH Popup random access OSD during Video Play.
User Manual Guide Model: QR-130 5. SATA HDD Installation Please install the player according to the following instructions. SATA HDD Installation 1、press the bottom cover. bracket. 4、put hard disk in. screws well . 2、open the bottom cover. 5、screw hard disk tightly 7、Insert the bracket with HDD. 8、Connect SATA or IDE cable 10、Insert bottom cover and close it. 11、Ok.
User Manual Guide Model: QR-130 13
User Manual Guide Model: QR-130 6. Partitioning and Formatting Hard Disk Non-formatted hard disks are not detected by PC. If the hard disk is not formatted, please take the following steps to format it. Newly purchased hard disks are not normally formatted 6-1 Setting and Formatting on Windows 98/ME In Windows 98SE, install and exclusive driver before proceeding to partition and Caution 1. formatting.
User Manual Guide 5. Model: QR-130 Among fdisk options, select options 5[change current fixed disk drive]. 6. Type the hard disk number fro partitioning in [Enter Fixed Disk Number] and press the [Enter] key 7. Select [1.creat DOS partition or Logical DOS Drive] in fdisk options by typing “1” and then press the enter key 8. Select [1.Creat Primary DOS Partition] in ‘Create DOS Partition or Logical DOS Drive’ by typing “1” and then press the enter key.
User Manual Guide 9. Model: QR-130 Wait for integrity check to be complete as below 10. After integrity check, say yes to the message ‘Do you wish to use the maximum available Size for a primary DOS partition and make the Partition active( Y/N)? By typing “Y” and press the enter key 11. Type in [capacity or % you want] and press the enter key. If you want to use one disk without partitioning. Type 100%. 12. Integrity check is started again.
User Manual Guide Model: QR-130 14. At hen C:\WINDOWS> prompt, type exit and then press[ENER] to return to window screen. 15. Disconnect QR130 from PC and then connect it again to PC. 16. Drive letter s created in [My Computer] of Windows Explorer. Right-click the created drive letter and select [Format]. 17. When formatting is completed , you can use QR130 as an external hard disk drive by connecting it to Computer.
User Manual Guide Model: QR-130 6-2 Setting and Formatting on Windows 2000 / XP Non-formatted hard disks are not detected by PC. If the hard disk is not formatted, please take the following steps to format it. Newly purchased hard disks are not normally formatted 1. Connect QR130 to a PC using a USB cable 2. Select [Start> Control Panel>management Tool>Computer Management] and then [Disk Management] under Computer Management menu. 3.
User Manual Guide 8. Model: QR-130 Select [Primary Partition(P)] and Click [Next] to continue 9. Enter the desired partition size in [Partition size in MB] and Click [Next] to continue. 10. When the [driver letter] is assigned, Click [Next] 11. In the format partition windows, select [format this partition with the following settings] and FAT32, and then check [Perform a quick format] box. Click [Next] to continue. 12.
User Manual Guide Model: QR-130 13. A new NTFS partition was created. 14. Right-click an [Unallocated] drive in Drive Management and select [New Partition] from the menu that appears. 15. When the New partition wizard is shown Click [Next] to continue. 16. Select [Primary Partition(p) and Click [Next] to continue. 17. Leave the value for [Partition size in MB] as if appears and Click [Next] to continue. (The partition size shown is the remaining hard disk size unallocated.) 18.
User Manual Guide Model: QR-130 19. In the format partition windows select [Format this partition with the following settings] and NTFS, and then check [Perform a quick format] box, Click [Next] to continue. 20. When [Completing the New Partition Wizard] appears, Click [Finish]. Drives formatted with NTFS file system are detected on windows 2000/XP, but not detected on Windows 98/ME. Do not select to use [Compressing Files and Folder] option.
User Manual Guide Model: QR-130 6-3 Hard disk formatting and partition under Windows VISTA Under VISTA, you can create a partition and format the hard disk using the disk manager. 1. Right click the Window icon located on the right hand side of the task bar. Please do me a fav our to insert the icon, thank you. The following menu will be displayed. Right click on “computer” then select “Manage” 2. You access the “Computer Management” software. Select “Service and Application” in the left column.
User Manual Guide Model: QR-130 5. The wizard-“Welcome to the New Simple Volume Wizard” will be displayed (Partition), Click on “Next” 6. Specify here the maximum size of the desired partition 7. In this window, tick the box “Assign the following drive letter” and let window name the letter, here it is D then click on “Next” . 8.
User Manual Guide Model: QR-130 9. In the right hand side window Click on “Finish” to close the window then start to format your hard disk. 10. “Healthy (Primary Partition)” will be displayed. When “Healthy (Primary Partition)” is displayed, this means that your QR130 hard disk is formatted and ready for use. You can now close the disk management window. 6-4 Use on Linux (Available on Linux 2.4 or later) [Auto Mount] After booting , log in as a root user. Connect this product and turn the power on .
User Manual Guide Model: QR-130 it is assumed that QR-130 is detected as sda in the example above .Drive name Note may subject to change depending on user environment .Please type the name of drive detected by USB Mass Storage. [How to Stop Using QR-130] You can unmount QR-130 in Device Manager. 6-5 Use on Macintosh As this product is automatically detected on Macintosh O/S 9.X or later, there is no need extra drivers.
User Manual Guide Model: QR-130 7. Connecting QR-130 7-1 TV Connection – A/V IN (1) Follow the picture and plug in the 3 color connector to the player's A/V IN jack; (2) Follow the picture and plug in the 3 color connector to the A/V OUT jack of the TV/IP TV Set-Top Box (STB). In this way, you can record TV programs from the TV/IPTV Set-Top Box.
User Manual Guide Model: QR-130 7-3 Connection with Y/Pb/Pr Component OUT (1) Follow the picture and plug in the 3 color connector to the player's Y/Pb/Pr jack; (2) Follow the picture and plug in the 3 color connector to the TV's Y/Pb/Pr jack. Audio Connection while using Y/Pb/Pr Video out: First method: use the audio output from the A/V OUT jack; Second method: use the audio output from the S/PDIF Coaxial or Optical jack. (3) In this way, you can also enjoy videos, music, and photos in the player on TV.
User Manual Guide Model: QR-130 7-5 Power Connection (1) Follow the picture and connect the AC adaptor to the player's DC IN jack; (2) Follow the picture and plug in the AC adaptor to the power outlet. 7-6 Ethernet Connection To connect to a LAN (Local Area Network) you require a cat5, cat5e or cat6 network cable (not supplied).
User Manual Guide Model: QR-130 7-7 WLAN Connection (by option) (1) Make sure the player is powered on; (2) Plug the Wireless LAN USB Adapter (i.e. Wi-Fi USB Dongle) to the USB HOST port of the player.
User Manual Guide Model: QR-130 7-9 Connection with Optical output "When you have a multi channel Decoder /amplifier with optical input, you can enjoy 5.1CH high quality sound through optical cable. The illustration on the top shows how to connect with optical cable" 7-10 First Time Usage HDD Installation For users who bought the player without a HDD inside, and want to install a SATA HDD, please see 5 HDD Installation for details.
User Manual Guide Model: QR-130 8. Getting Started Power on the system, and after a few seconds, the system will enter a guide menu. 8-1 Selecting Video In-Live TV, Recording and Time Shift Choose this option, you can pre-view the video to be recorded, or have time shift function (See TIME SHIFT button in Remote Control for more details). To select an input source, select Video In button on the guide menu page.
User Manual Guide Model: QR-130 HDD/USB or Network, and playback them on TV. Press on the remote control or select Browser button on the guide menu page to browse movie, photo, and music files stored either on a HDD, USB device, or Network. 8-4 Selecting Setup To enter the setup menu, press on the remote control or select setup option on the guide menu page. 8-5 Timer Rec To enter the Timer Rec, select Timer Rec option on the guide menu page, you can make detail record setting in this function.
User Manual Guide Model: QR-130 9. Setup Menu The Setup Menu allows you to configure language, audio, video, record, network and system settings. To enter the menu, select Setup from the Guide menu or press button on the remote control. 9-1 Changing System Settings Press and on the remote control to select the System tab from the menu. Menu Language Press on “Menu Language”, use you want and Press , and to confirm. Text Encoding Select to set text encoding. Press and to select from Unicode.
User Manual Guide Model: QR-130 Time Select to set the system time. Press Enter the system menu and press to adjust each setting. Press and enter Manual setup. and to select each field and the up and down navigation arrows to confirm. Restore Default Select to restore factory defaults. A confirmation message appears. Select and press Enter to restore all settings to defaults.
User Manual Guide Model: QR-130 9-2 Changing Audio Settings Press and on the remote control to select the Audio tab from the menu bar. Night Mode Select to set night mode. Press and to select from Off, On, and Comfort. Press confirm. Digital Output Select to set Digital Output mode. Press and to select from Raw, and LPCM. Press 35 to confirm.
User Manual Guide Model: QR-130 9-3 Changing Video Settings Press and on the remote control to select the Video tab from the menu bar. Aspect Ratio Press and to select from Pan Scan 4:3, Letter Box 4:3, or 16:9. Press to confirm. Pan Scan 4:3: Display a wide picture on the entire screen and cut off the redundant portions. Select when a standard 4:3 TV is connected. Letter Box 4:3: Display a wide picture with two black borders on the top and bottom of 4:3 screen.
User Manual Guide Model: QR-130 Brightness Select to set brightness levels. Press previewed onscreen. Press and to adjust brightness. The new setting is to confirm. Contrast Press and to adjust contrast. The new setting is previewed onscreen. Press to confirm. Video System Press and to set the TV system, depending on your viewing preferences. Press confirm.
User Manual Guide Model: QR-130 9-4 Changing Record Settings Press and on the remote control to select the Record tab from the menu bar. Quality Press and to select the quality setting you require. The highest quality setting is HQ which requires the most storage space. The other settings reduce recording quality sequentially but also require to confirm。 less storage space. Press Permanent Timeshift Press and to select from On and Off. Press will be activate permanently. 38 to confirm.
User Manual Guide Model: QR-130 Record Device Select to set device to restore the recorded files. and Press to select from HDD and USB. Press to confirm. 9-5 Changing Network Settings Press and on the remote control to select the Network tab from the menu bar.
User Manual Guide Model: QR-130 Wired LAN Setup Press and to select DHCP IP (AUTO) or FIX IP (MANUAL). Press DHCP IP (AUTO): Set the IP address by auto. Press to confirm. to confirm. FIX IP (MANUAL): Using Fixed IP, it is required to enter the followings: IP address, Subnet Mask, and Default Gateway. For further assistance to the above settings, please contact the network administrator. Use Navigational and Numeric buttons to enter IP address. Press to confirm.
User Manual Guide Model: QR-130 There appear two connection modes: Infrastructure (AP) mode and Peer to Peer (Ad Hoc) mode. If you Want to chang the setting, choose the Modify, if not , just Connect. Press Press to last step , and and for next step. to select items, and ok to confirm. Infrastructure (AP) Infrastructure mode is used to connect computers with wireless network adapters, also known as wireless clients, to an existing wired network with the help from wireless router or access point.
User Manual Guide Model: QR-130 Select the access point you wish to access from the SSID list. In the Security list, WEP (Wired Equivalent Privacy) and WPA (Wi-Fi Protected Access) note means the network is encrypted, i.e. an encryption key is needed to access the network. NONE means it is an open system network. 2) Confirm SSID Name 3) WLAN Security Setting Select Open System if the network is not encrypted.
User Manual Guide Model: QR-130 5) Setting List The Setting List displays the network settings just now you configured. 6) Test Connection The test will take for a while, please be patient to wait. If the test is ok, the network information will be displayed. Peer to Peer (Ad Hoc) Peer to Peer mode, which is also called Ad Hoc mode or computer-to-computer mode, is used to connect wireless clients directly together, without the need for a wireless router or access point.
User Manual Guide note Model: QR-130 Both the player and your PC need to use the Ad Hoc mode, share a common SSID, and be put into the same IP range. 2) Save and Startup Select OK to confirm the above settings. If the test is ok, the network information will be displayed.
User Manual Guide Model: QR-130 10. Browser Menu The Browser menu allows you to browse and play music, photo and movie files stored on a HDD, an external USB device, and Network. To enter the menu, select Browser from the Guide menu. Press and to select the device on which the media is stored. Choose from HDD, USB, NET, and press When data on HDD, USB device is connected or connect the system to Network, you can also browse photos, listen to music, and watch movies.
User Manual Guide Model: QR-130 All directories and supported contents will be displayed. and to select the directory or file you wish to browse, and press to confirm. 10-2 Browsing Music Use and on the remote control to select the Music tab. All directories and supported audio files in current directory will be displayed. Press and to select the file you want to play. Press select and confirm button which enables you to add the current music to the playlists.
User Manual Guide Model: QR-130 While browsing a photo, you can press photo, you can press or to rotate a photo in any angle. Besides rotating a to zoom in/out that photo.Five zoom levels are available. 10-4 Browsing Movie Use and on the remote control to select the Movies tab. All directories and supported video files in current directory will be displayed. Press to select the movie you want to view and press and . The movie will be played in full screen mode.
User Manual Guide Model: QR-130 [1] Browsing through Workgroup ou can choose the workgroup which your PC belongs to from the workgroup list, find your PC name, and press to confirm. Then select the shared multimedia file that you want to browse. 1. While browsing high definition video files (resolution up to 720p / 1080i) via Ethernet or WLAN, the video might be buffering. It is normal due to the limit of network speed or NOTE signal strength. 2.
User Manual Guide Model: QR-130 -See above. - Select Specific File Server IP, and use Navigational and Numeric buttons to enter IP address. - You can also select Detail to set the Label, Domain, and Host Name of the shortcut. Then select OK to confirm. Select the shortcut you added and press ok to confirm。 Then select the shared multimedia file that you want to browse. 10-6 File Management In this File management chapter, there would be some introduction for file management.
User Manual Guide 3. Press Model: QR-130 on the remote control or the ENTER (Play)button on the front panel to play the file. 4. Press on the remote control stop playback and return to the Title List menu screen Deleting Titles To delete a title, do the following: 1. Press and on the remote control to select the title you wish to delete, press ‘delete’ button. 2. When confirmation message appears. Press 3. Press or and select Delete. to delete the selected file.
User Manual Guide Model: QR-130 and lowercase letters. Press <- to delete a letter. Press -> to insert a space. Press to input each letter or number. 5. Once you have entered the new name, select OK and press to confirm all change, If you want to cancel the naming during the process, choose return. 10-6 Playlist Add your favorite movie from USB,HDD,NET to the playlist, and more easy to enjoy it next time. 1) Get in to USB, HDD,NET in Browse.
User Manual Guide 2) Model: QR-130 And then press CONFIRM bottom on the remote control 3) you can find the file which was added in playlist 52
User Manual Guide Model: QR-130 11. Media Recording 11-1 Recording from Video-In Mode Select Video-in option from the Guide List, enter into this Video-in mode, and press ‘REC’ button to recording files. 11-2 Time Record Menu The Timer Record menu allows you to create, edit and delete recording schedules and view all schedule st on the remote control to enter the menu. atus and history. Press Create a New Schedule Press and on the remote control to select the Edit tab from the menu bar.
User Manual Guide Model: QR-130 Editing Schedule Press and on the remote control to select the Edit tab from the menu bar. Select the schedule you want to edit from the list and press . The schedule setting screen appears. Modify the schedule as described in 11-2 Creating a New Schedule. Deleting Schedules Press and on the remote control to select the Delete tab from the menu bar. Select the schedule you want to delete and press . A confirmation message appears.
User Manual Guide Model: QR-130 Viewing Schedule Status Press and on the remote control to select the Status tab from the menu bar. The schedule list is displayed. Select a schedule and press . Viewing Recording History Press and on the remote control to select the History tab from the menu bar. Here you can view a complete history of all recordings that were set. NOTE Recording function can only realize with Hard Disk file system: FAT32, NTFS cannot support this function.
User Manual Guide Model: QR-130 12. File Copy Menu Press COPY bottom on the remote control to enter the File Copy menu, which allows you to copy files between HDD, USB devices and Network. Step 1: Select the source device and destination device. Press and to select device. Press to cancel, and Step 2: Select the source files you want to copy. Press play button to select files, to cancel,and 56 to next step. for next step.
User Manual Guide Model: QR-130 Step 3: Select the destination folder to store the above files. Press and to select folder. Press to cancel, and for next step. Step 4: Proceed to copy selected files. Press NOTE and to select OK, press to confirm. And the copy will start. File copy function can only realize with Hard Disk file system: FAT32, NTFS cannot support this function.
User Manual Guide Model: QR-130 13. Firmware Upgrade 13-1 System information In video-in Mode, please press ‘stop’ first, and ‘ pause’ button later, the player system information would appears as follows including firmware version no. 13-2 Firmware Upgrade If it is the first time that you are installing a SATA HDD (no matter it is a new one or an old one into the player, please make sure you have read the following steps in advance.
User Manual Guide Model: QR-130 upgrade will start in about 30 seconds. If it is connected to a TV set, a yellow install page will appear on the TV screen. Please wait for about 3 minutes, the installation will be completed and player will be restarted automatically. Note: If install error or white screen occurs, please unplug the power cable and try again; Do not turn off the power during installation; The USB Pen Drive is not allowed to be unplugged during installation.
User Manual Guide Model: QR-130 17. Frequently Asked Questions Question1. My computer does not recognize my player. 1. Make sure the player is powered on. If it is off, the computer will not be able to find the player; 2. Make sure the player is connected to computer. 3. When using Windows 98SE, install the USB driver first. After installation, restart the computer. Then reconnect the player to the computer. 4.
User Manual Guide Model: QR-130 Question 5. My files have disappeared from the player. Make sure that you browse your files via the correct Browser mode which means correct filtered views such as Photos, Music, or Movies. Question 6. Why do some supported photo formats, cannot be shown in the photo function? In the JPEG format there are different modes. The player doesn’t support all the modes. So you have to change your photo format first as follow: 1. Use Photoshop to open the photo; 2.
User Manual Guide Model: QR-130 Question 8: Why when I switch to Y/Pb/Pr 480P, 576P, 720P, 1080I, does the TV screen display an unwatchable picture? Please check if your TV supports Y/Pb/Pr 480P, 576P, 720P, 1080I output, if your TV does not support, please use the A/V signal display instead, press the TV SYSYEM button on the remote control, NTSC or PAL.
User Manual Guide Model: QR-130 Question 13: I configured everything correctly, but still cannot get the wireless network connected. Are you using a firewall such as Norton Internet Security, McAfee Personal Firewall, Zone Alarm, etc. or even the built-hat Service Pack 2 for Windows XP automatically upgrades your firewall and turn it on by default) If you have a firewall, it may need to be configured or have exceptions created to allow you to see and communicate with the player on the network.
User Manual Guide Model: QR-130 18. Caution This player's design and manufacture has your safety in mind. In order to safely and effectively use this player, please read the following before usage. Usage cautions User should not modify this player. If commercial hard disk is being used, the environmental temperature should be within +5℃ ~ +35℃. Power The player's power voltage: DC 12V. When using this player, please connect the supplied AC adapter or AC adapter cable to the player's power jack.
User Manual Guide Model: QR-130 Hard disk cautions The player uses an internal hard disk for data storage, in normal case, format or repair is not required. You should carefully read the < Frequently Asked Questions > chapter, and check our website for latest information before formatting the hard disk. - Physical impact may create bad sector in the hard disk, you can use CHKDSK to fix the problem.
User Manual Guide Model: QR-130 Warranty z Warranty Regulations The ZIONCOM Technologies Co., Ltd. Provides the following limited warranty based on the consumer protection policy. Limited warranty period starts form the date of purchase. The purchase date must be stated when the product is purchased. When the purchase date is not stated, the limited warranty ends after one year and six months form the manufacturing date. 1.
User Manual Guide Model: QR-130 67
