Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 96
Figure 5-6 Statistics Page: Bridge Statistics
Attribute
Description
Incoming Octets (in-octets)
The total number of octets received on the interface,
including framing characters.
Incoming Packets (in-packets)
The total number of packets received on the interface.
Incoming Multicast Packets (in-
mcast-pkts)
The number of multicast packets received on the
interface.
Erroneous Incoming Packets (in-
errors)
The number of received erred packets.
Discarded Incoming Packets (in-
discards)
The number of packets which were chosen to be
discarded due to RX FIFO full.
Outgoing Octets (out-octets)
The total number of octets transmitted out of the
interface, including framing characters.
Outgoing Packets (out-packets)
The total number of packets transmitted out of the
interface.
Erroneous Outgoing Packets (out-
error-packets)
The number of outbound packets that could not be
transmitted because of errors.
Discarded Outgoing Packets (out-
discard-packets)
The number of outbound packets which were chosen to
be discarded due to excessive collision or excessive
deferral.
Note that packets may be dropped due to traffic exceeding the radio link’s available
bandwidth.
Statistics may be cleared or exported to Excel.
5.5.4 Radio Statistics
Radio statistics counters (since last cleared or last power up) are presented per radio
interface and name of TU (device name).