Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 93
Connect the Ethernet traffic from the Customer’s end-equipment or Ethernet analyzer
to the local radio and apply radio loopback on local radio for local testing. This will allow
you to test the connection (cable/fiber) to the local radio, the interface between end-
equipment and the local system and the local radio.
5.5 Statistics
The performance statistics tab is available on each page and gathered on the Statistics
page.
5.5.1 Ethernet Statistics
Ethernet statistics are presented per port (line interface and radio interface).
Cumulative since last cleared or system’s reboot.
Figure 5-4 Statistics Page: Ethernet Statistics
Attribute
Description
Incoming Octets (in-octets)
The total number of octets received on the interface,
including framing characters.
Incoming Unicast Packets (in-ucast-
pkts)
The number of unicast packets received on the
interface.
Discarded Incoming Packets (in-
discards)
The number of packets which were chosen to be
discarded due to RX FIFO full.
Erroneous Incoming Packets (in-
errors)
The number of received erred packets.
Outgoing Octets (out-octets)
The total number of octets transmitted out of the
interface, including framing characters.
Outgoing Unicast Packets (out-ucast-
The number of unicast packets transmitted out of the