Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 69
In this example Bridge #1 will be used for management coming from port eth1and
second bridge will be created to carry the traffic of the other ports (transparent bridge
between all ports but eth1 and host).
• Access Port to Customer Port (PVID)
For cases where you want to add C-VLAN to all traffic coming from specific port and
carry it to specific radio interface.
In this example Bridge #2 will be used to tag all incoming traffic from port eth1 and
transmitted with C-VLAN 100 over eth-tu1 radio interface.
Bridge #1 will implement transparent bridge on all other ports (transparent bridge
between all ports but eth1 and eth-tu1).
• Customer Port to Provider Port
For cases where you want to add S-VLAN to traffic coming from specific port with
specific C-VLAN and carry it to specific radio interface.
In this example Bridge #2 will be used to tag incoming traffic with C-VLAN 100 from port
eth1 and transmitted with additional S-VLAN 3000 over eth-tu1 radio interface.
Bridge #1 will implement transparent bridge on all other ports (transparent bridge
between all ports but eth1 and eth-tu1).