Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 67
3.9 Services Configuration and Monitoring
The Ethernet services and bridges (VLANs) parameters and monitoring are managed in
the Services page.
The bridge architecture of the MultiHaul™ radios allows defining 802.1q and 802.1ad
services, including adding VLAN, removing VLANs and VLAN translation.
Up to 100 bridges can be defined and ports (line ports and radio ports) may be attached
to the bridge as customer port (C-VLAN), provider port (S-VLAN) or Provider Bridge port
(Q-in-Q).
Ports may be added, deleted or edited on specific bridges.
Bridge port types:
• None – all traffic, regardless of VLANs.
• C-VLAN – traffic with single C-VLAN (customer port)
• S-VLAN – traffic with single S-VLAN (provider port)
• Q-in-Q – traffic with C-VLAN and S-VLAN
Figure 3-33 Services Page: Settings
Important notes:
1) Traffic egressing a tagged port (C-VLAN, S-VLAN or Q-in-Q) that came in from a
port set to None, the C/S VLAN is added on top of any existing VLAN.
2) Once bridge-port created user can modify its ether-type: C-VLAN/S-VLAN and its
pcp-priority (P-bit override).
3) Each bridge-port can participate only in one bridge.