Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 62
The ARP table is used to map between IP addresses and physical addresses. You can
map specific IP address to specific MAC address and create or modify entries in the ARP
table.
3.8.4 Users Administration
Figure 3-29 Network Page: Users Administration
Internal user management and external Radius or TACACS server are supported.
The Users administration page will be updated based on the selected Authentication
Mode.
For internal user management (standard user/passwords that are configured in the
device), select Local as the Authentication Mode.
This section allows monitoring and configuring the following parameters:
• Users
The system supports 4 types of users that can be defined locally:
o User – Read-only access. Cannot view user names, passwords, and other
security settings.
o Tech – Read-only access for all configuration settings. Can clear statistics,
alarms, and log lists, and run diagnostics.
o Super – Read-write access for all configuration settings but user names,
passwords, and other security settings.
o Admin – Full read-write.