Operation and Maintenance Manual
MultiHaul™ Installation, Operation and Maintenance Manual
Page 60
3.8.2 Advanced Settings
Figure 3-27 Network Page: Advanced Settings
This section allows monitoring and configuring the following parameters:
• Management Access List
List of authorized IP addresses (or IP address ranges) that are permitted to access
the Host (management).
The default configuration allows all IP address to access the Host.
o # - Index (1-8)
o IP Address
o Prefix-Length – together with the IP address determine IP address range
• SNMP Agent
SNMP Agent properties (SNMP passwords).
o Read Community – default is public. Used for Read access (SNMP Get).
o Write Community – default is private. Used for Read/Write access (SNMP
Set).
o SNMP-Version – SNMPv2c or SNMPv3. Default is v2c.
• SNMPv3 Users
For SNMPv3 configuration, refer to the SNMPv3 Users Configuration section under
System Administration chapter of this manual.