Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 59
Note that changes to the IP address settings will require reconnecting using the new IP
address.
• SNMP Managers
Up to five managers that will receive SNMP traps can be configured (SNMPv2c or
SNMPv3).
o # - Index (1-5)
o IP Address – Destination IP Address
o UDP Port – port number for sending traps
o Security Name (community)
o SNMP Ver – SNMP version (SNMPv2c or SNMPv3)
o Engine ID – Used for SNMPv3
For SNMPv3 configuration, refer to the SNMPv3 Users Configuration section
under System Administration chapter of this manual.
• NTP
The Network Time Protocol (NTP) is a protocol for synchronizing the clocks of
network elements over packet-switched, variable-latency data networks. The system
has an embedded NTP client. It can synchronize the host clock to any NTP server in
the LAN/Internet to deliver accurate and reliable time. Primary and secondary
servers can be defi4ned.
o Server IP – primary NTP server IP Address
o Secondary Server IP – secondary NTP server IP Address
o TMZ – time-zone shift in hours (-12 to 14). Note that changing the TMZ value
will change the time displayed.