Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 55
3.7.3.4 Scripts
Figure 3-23 System Page: Maintenance – Scripts
The MultiHaul™ supports the use of pre-composed, multiple-line command scripts.
A script is simply a list of CLI commands, saved as a text file that runs locally on the
system. Script output is displayed on a script output screen and can be copied and
saved.
The Scripts section displays the scripts that were loaded to the system.
There are useful scripts that are pre-loaded to the system in the factory:
1) clear_statistics – this script clears all the statistics counters of the system,
including RF statistics, Ethernet statistics, VLAN statistics and Queue
statistics.
2) System_info – this script collects all the relevant system status, logs,
configurations and statistics.
Select a script from the list and click Show to view (pop-up screen) list of commands
composing this script.
Click Run to run the selected script. The commands in the script will be executed one
after the other. Pop-up screen will display the progress and outcome of the script.
Click Delete to delete the selected script.
Enter a file name and click Load Script to load a new script file.
When clicking Load Script, the system will look for the file at the FTP directory and
will store it in the file system as a new script (under directory scripts/).
Note:
Whenever contacting Siklu for support, send the output of this script from all
systems for efficient service (copy the output to a text file).