Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 54
1) Download. Transferring the new license file to the system.
2) Enable. Enabling the license components. Note that if you restore factory
default configuration, the system will come up with the available license
components enabled.
The system supports temporary license that is available for 30 days. Once enabled, a
countdown timer will run as long as the system is powered on. When timer expires, the
system will reboot and come up with data rate /functionality based on the available
license.
The temporary license can be enabled/disabled for each license component individually.
Caution:
Use temporary license with caution and do not forget to apply permanent license. If
the 30 day expire before adding permanent license, link might go down or some
essential functionality, controlled by license, will be disabled, what might impair
service.
The Licensing section displays the current configuration of the license components
(data-rate and features enable/disable) and states if license component is available
(permission).
The License File Name is an R/O field that will always be according to the
system's serial number (<system_serial_number>.lic).
Click Browse and Download to select and download a new license file. As the
license file name is always <system_serial_number>.lic, it will be displayed as the
License File Name.
The Permission field indicates rate/functionality availability based on the license file.
Use the Config field to set up the desired rate or to enable/disable functionality.
The Status field indicates rate/functionality base on license (Permission),
configuration (Config) and temporary license activation.
Note:
Enabling license components will introduce a momentary service disruption.