Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 53
Click Download to start the software download from the server to the system.
Click Upgrade to activate the downloaded software. If you have specified time for
the upgrade (Scheduled Run Time [HH:MM]), the software will be activated at this
time. If you have not specified such time, the downloaded software will be activated
immediately.
Note that this action will result in system reboot.
Click Accept to accept the new SW.
3.7.3.3 Licensing
Figure 3-22 System Page: Maintenance – Licensing
Available licenses:
• Data rate (capacity) – BU: 500Mbps or 1800Mbps, TU: 100Mbps or 1000Mbps).
• PSE – PoE out (13W, 26 or 53W, according to product specs). PSE license
available by default.
License upgrade key is a signature file containing the license configuration that is based
on the system's serial number. License file will be provided by Siklu as a text file that can
be opened with any text editor. The license file name will always be
<system_serial_number>.lic.
The license upgrade is done using HTTP or an external FTP/TFTP/SFTP server. Refer to
server's configuration as defined in the File Transfer section.
The license upgrade process consists of 2 steps:
Note:
Always upgrade both sides (all remote Terminal Units).
When upgrading an operational links, upgrade the remote systems first and then the
local system. Accept the software at both ends after verifying that the link performs
as expected.