Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 51
3.7.3 Maintenance
3.7.3.1 File Transfer
Figure 3-20 System Page: Maintenance – File Transfer
The administration of the file system is controlled by the File Transfer session. It
includes the configuration files, SW version, licenses, scripts, inventory and more.
File transfer is available over HTTP when using the web-GUI. In this case, no external
FTP, TFTP or SFTP server is required for file transfer.
In order to transfer files over FTP/TFTP/SFTP, FTP/TFTP/SFTP server must be running
and the file transfer attributes must be configured.
This section allows configuring the following parameters:
• Protocol – HTTP, FTP, TFTP or SFTP.
• Server IP – the IP address of the server where the FTP/TFTP/SFTP server is
running on.
• Path – the path of the stored file (or target destination) relative to the directory
used for file transfers as configured in the server. If left blank, file transfer will
be from/to the server's Root (or Home) directory.
• User – username, as defined in the server. Leave blank if anonymous user
defined.
• Password – password, as defined in the server. Leave blank if anonymous user
defined.
Note:
The simplest and recommended way to transfer files is using HTTP file transfer.