Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 5
Safety and Regulatory Notices
The following are mandatory notices for installation and operation of MultiHaul™
Wireless Backhaul Link. Indications appearing here are required by the designated
government and regulatory agencies for purposes of safety and compliance.
General
Do not install or operate this System in the presence of flammable gases or fumes.
Operating any electrical instrument in such an environment is a safety hazard.
European Commission
This product has been designed to comply with CE markings in accordance with the
requirements of European Directive 1995/5/EC, 2011/65/EU and RED 2014/53/EU (see
declaration of conformity enclosed).
This equipment must be permanently grounded for protection and functional purposes.
To make a protective earth connection, use the grounding point located on the System
ODU using a minimum amount of 16AWG grounding cable or according to local
electrical code.
This apparatus is intended to be accessible only to authorized personnel. Failure to
prevent access by unauthorized personnel will invalidate any approval given to this
apparatus.
This product is in full compliance with the following standards:
• RF EN 302 567-2 V1.2.1
V-Band FCC Part 15.255
• EMC EN 301 489-1, 301 489-4
• Safety EN 62368-1, UL 60950
• Operation EN 300 019-1-4 Class 4.1
• Storage EN 300 019-1-1 Class 1.2
• Transportation EN 300 019-1-2 Class 2.2
• Reduction of hazardous waste EN 50581