Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 47
This section allows monitoring and configuring the following parameters:
• Port status visual display (Green – port is up).
• Port Type – RJ45 or SFP
• Port Enable – checkbox to enable the port.
• Auto Negotiation – checkbox to enable auto-neg.
• Speed/Duplex – speed (10/100 or 1000) and duplex (half/full) setting:
o When Auto Negotiation Enabled – R/O field indicating the current
speed/duplex
o When Auto Negotiation Disabled – allows configuring the speed/duplex.
o R/O field indicating the current speed/duplex (note that for SFP ports, only
1000 speed is available).
• Speed/Duplex (SFP) – 1000XFD (for 1Gbps) or 2500XFD (for 2.5Gbps) SFPs.
3.6.2 Advanced Settings
Figure 3-16 Eth Ports Page: Advanced Settings
This section allows monitoring and configuring the following parameters:
• Alias – text field for port.
3.6.3 Maintenance
Figure 3-17 Eth Ports Page: Maintenance