Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 36
3.4 Quick Configuration Wizard
Use the Quick Configuration wizard to configure the basic system parameters. It covers
the basic minimal configuration required to start using the link.
The Quick Configuration wizard should be used for the initial system setup after
installation. For monitoring and advanced configuration, please refer to the dedicated
configuration pages of the Web-Based Management.
To access the Quick Configuration wizard, go to the Quick Config page.
3.4.1 Quick Configuration: Step 1 – System
Figure 3-6 Quick Config Page: Step 1 - System
The first section allows configuring the following parameters:
• Name – you can give a name to each system
• Date – [YYYY.MM.DD]
• Time – [HH:MM:SS]
Click Copy to all to set identical Date & Time on remote terminals.
Click Next to continue.
3.4.2 Quick Configuration: Step 2 – Radio
Figure 3-7 Quick Config Page: Step 2 - Radio