Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 33
3.2 Web-Based Management Main Page
The Web-Based Management provides link view, presenting both local and remote (or
remotes, in case of multiple Terminal Units) configuration and monitoring.
Note:
Depending on your workstation’s screen size and resolution, you may need to scroll
the screen vertically or horizontally in order to view all options for local + remote.
Alternatively, you may change the change the Internet’s Browser display distance
(Zoom out, using Ctrl+Minus).
Although the local and remote systems IP address is identical (default IP address
192.168.0.1), the remote can be displayed as the MultiHaul™ uses dedicated
communication channel for local-remote communication that is not IP-based.
It is recommended, however, to assign dedicated IP address for local and remote
systems.
Note:
When first connecting to a link or cluster with units in their default IP address, you
may connect to a different unit, not necessarily the one you are connected to. Assign
additional dedicated IP addresses and use it instead of the default one.
The Web-Based Management Main page is a read-only page and displays the following
information:
• Product – product model (factory).
• Name – the configured name of the unit (by default, same as Product).
• Physical view – of local and remote units, with interfaces and led status.
• Link Status – Link up or down (with visual indication).
• Frequency – channel number (2 or 3).
• Throughput – for Tx and Rx over the RF interface (in Mbps). Displayed for the
last 1-second interval.
• Current Alarms – list of currently active alarms and date&time raised.
• History Log – System alarms and events history log.
• User Activity Log – All configuration changes are logged, including user and
date&time (presented in the form of CLI commands).